How to service and repair the ABS Control Module for Antilock Brakes on 2002 Toyota Tacoma?

You must start the Hydraulic Control Assembly for Antilock Brakes repair process by taking off the brake line cover. The connector should be removed through the release bar pullout process. Special Service Tool: 09023-00100 should be used to disconnect the 5 brake lines from the ABS actuator by maintaining a torque of 15 Nm (155 kgf-cm, 11 ft. lbs.). First remove the ABS actuator assembly by undocking its bolt along with two nuts while tightening them to 19 Nm (195 kgf-cm, 14 ft. lbs.). You should utilize a T25 torx wrench to detach the 3 actuator bracket bolts that need 9.0 Nm (91.8 kgf-cm, 80 inch lbs.) of torque. The installation process should start by performing all removal operations in reverse order while brake fluid must be added to the reservoir following system bleeding and leak inspection.

OEM 2002 Toyota Tacoma ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Control Modules found

View related parts
2002 Toyota Tacoma Modulator Valve
Part Number: 44050-04020
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.1 x 7.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2002 Toyota Tacoma Modulator Valve
Part Number: 44050-04010
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.0 x 7.8 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2002 Toyota Tacoma Control Module
Part Number: 89541-04020
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Part Name Code: 89541
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.4 x 7.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89541-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2002 Toyota Tacoma Control Module
Part Number: 89541-04010
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Part Name Code: 89541
- Item Weight: 1.70 Pounds
- Item Dimensions: 9.4 x 7.5 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89541-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

2002 Toyota Tacoma ABS Control Module

Looking for affordable OEM 2002 Toyota Tacoma ABS Control Module? Explore our comprehensive catalogue of genuine 2002 Toyota Tacoma ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2002 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the ABS Control Module for Antilock Brakes on 2002 Toyota Tacoma?
A: You must start the Hydraulic Control Assembly for Antilock Brakes repair process by taking off the brake line cover. The connector should be removed through the release bar pullout process. Special Service Tool: 09023-00100 should be used to disconnect the 5 brake lines from the ABS actuator by maintaining a torque of 15 Nm (155 kgf-cm, 11 ft. lbs.). First remove the ABS actuator assembly by undocking its bolt along with two nuts while tightening them to 19 Nm (195 kgf-cm, 14 ft. lbs.). You should utilize a T25 torx wrench to detach the 3 actuator bracket bolts that need 9.0 Nm (91.8 kgf-cm, 80 inch lbs.) of torque. The installation process should start by performing all removal operations in reverse order while brake fluid must be added to the reservoir following system bleeding and leak inspection.