How to service and repair the ABS Control Module for Antilock Brakes on 2001 Toyota Tacoma?

Service and repair the Hydraulic Control Assembly for Antilock Brakes needs the brake line cover removal before starting. The next step requires users to pull out the release bar for disconnecting the connector. Special Service Tool: 09023-00100 must be used to disconnect the 5 brake lines from the ABS actuator while torquing them to 15 Nm (155 kgf-cm, 11 ft. lbs.). Then you should take off the boltd 2 nuts by applying 19 Nm torque (195 kgf-cm, 14 ft. lbs.) to remove the ABS actuator assembly. A T25 torx wrench should be used to loosen the 3 actuator bracket-mounting bolts with 9.0 Nm (91.8 kgf-cm, 80 inch lbs). To install the part proceed with the reverse order of the removal process and complete the installation by refilling brake fluid into the reservoir then bleeding the brake system and verifying there are no fluid leaks.

OEM 2001 Toyota Tacoma ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Control Modules found

View related parts
2001 Toyota Tacoma Modulator Valve
Part Number: 44050-04020
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.1 x 7.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Modulator Valve
Part Number: 44050-04010
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.0 x 7.8 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Control Module
Part Number: 89541-04020
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Part Name Code: 89541
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.4 x 7.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89541-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2001 Toyota Tacoma Control Module
Part Number: 89541-04010
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Part Name Code: 89541
- Item Weight: 1.70 Pounds
- Item Dimensions: 9.4 x 7.5 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89541-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

2001 Toyota Tacoma ABS Control Module

Looking for affordable OEM 2001 Toyota Tacoma ABS Control Module? Explore our comprehensive catalogue of genuine 2001 Toyota Tacoma ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the ABS Control Module for Antilock Brakes on 2001 Toyota Tacoma?
A: Service and repair the Hydraulic Control Assembly for Antilock Brakes needs the brake line cover removal before starting. The next step requires users to pull out the release bar for disconnecting the connector. Special Service Tool: 09023-00100 must be used to disconnect the 5 brake lines from the ABS actuator while torquing them to 15 Nm (155 kgf-cm, 11 ft. lbs.). Then you should take off the boltd 2 nuts by applying 19 Nm torque (195 kgf-cm, 14 ft. lbs.) to remove the ABS actuator assembly. A T25 torx wrench should be used to loosen the 3 actuator bracket-mounting bolts with 9.0 Nm (91.8 kgf-cm, 80 inch lbs). To install the part proceed with the reverse order of the removal process and complete the installation by refilling brake fluid into the reservoir then bleeding the brake system and verifying there are no fluid leaks.