How to service and repair the ABS Control Module for Antilock Brakes on 2000 Toyota Tacoma?

The first maintenance step for Antilock Brake Hydraulic Control Assembly requires removal of brake line cover. You should start by removing the connector through the release bar extraction method. Remove the 5 brake lines from the ABS actuator using Special Service Tool: 09023-00100 by applying 15 Nm (155 kgf-cm, 11 ft. lbs.) torque. You must first remove a bolt and two nuts from the ABS actuator assembly before extracting it using 19 Nm torque (195 kgf-cm, 14 ft. lbs.). A T25 torx wrench will remove the 3 actuator bracket securing bolts by applying a torque of 9.0 Nm (91.8 kgf-cm, 80 inch lbs.). You should begin by doing the opposite of the removal process for installation while finishing with brake fluid addition to the reservoir followed by brake system bleeding and leakage checks.

OEM 2000 Toyota Tacoma ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Control Modules found

View related parts
2000 Toyota Tacoma Modulator Valve
Part Number: 44050-04020
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.1 x 7.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Modulator Valve
Part Number: 44050-04010
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.0 x 7.8 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Control Module
Part Number: 89541-04020
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Part Name Code: 89541
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.4 x 7.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89541-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Control Module
Part Number: 89541-04010
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Part Name Code: 89541
- Item Weight: 1.70 Pounds
- Item Dimensions: 9.4 x 7.5 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89541-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

2000 Toyota Tacoma ABS Control Module

Looking for affordable OEM 2000 Toyota Tacoma ABS Control Module? Explore our comprehensive catalogue of genuine 2000 Toyota Tacoma ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2000 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the ABS Control Module for Antilock Brakes on 2000 Toyota Tacoma?
A: The first maintenance step for Antilock Brake Hydraulic Control Assembly requires removal of brake line cover. You should start by removing the connector through the release bar extraction method. Remove the 5 brake lines from the ABS actuator using Special Service Tool: 09023-00100 by applying 15 Nm (155 kgf-cm, 11 ft. lbs.) torque. You must first remove a bolt and two nuts from the ABS actuator assembly before extracting it using 19 Nm torque (195 kgf-cm, 14 ft. lbs.). A T25 torx wrench will remove the 3 actuator bracket securing bolts by applying a torque of 9.0 Nm (91.8 kgf-cm, 80 inch lbs.). You should begin by doing the opposite of the removal process for installation while finishing with brake fluid addition to the reservoir followed by brake system bleeding and leakage checks.