How to service and repair the ABS Control Module for Antilock Brakes on 2003 Toyota Tacoma?

The first step of Hydraulic Control Assembly Antilock Brakes servicing requires disconnecting the connector followed by brake lines disconnection with Special Service Tool: 9023-00100 to free the 5 brake lines from the ABS actuator while maintaining a torque at 15 Nm (155 kgf-cm, 11 ft. lbs.). The ABS actuator assembly will come off after you remove its bolt and both 2 nuts while applying 19 Nm (195 kgf-cm, 14 ft. lbs.) torque. The next step involves the detachment of the ABS actuator by unscrewing all four nuts at 5.4 Nm (55 kgf-cm, 48 inch lbs.). The installation sequence should follow the reverse steps which were used for removal. Following this, fill the brake reservoir with fluid and perform brake system bleeding while checking for any fluid leakage.

OEM 2003 Toyota Tacoma ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Control Modules found

View related parts
2003 Toyota Tacoma Modulator Valve
Part Number: 44050-04020
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.1 x 7.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2003 Toyota Tacoma Modulator Valve
Part Number: 44050-04010
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.0 x 7.8 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2003 Toyota Tacoma Control Module
Part Number: 89541-04020
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Part Name Code: 89541
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.4 x 7.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89541-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2003 Toyota Tacoma Control Module
Part Number: 89541-04010
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Part Name Code: 89541
- Item Weight: 1.70 Pounds
- Item Dimensions: 9.4 x 7.5 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89541-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

2003 Toyota Tacoma ABS Control Module

Looking for affordable OEM 2003 Toyota Tacoma ABS Control Module? Explore our comprehensive catalogue of genuine 2003 Toyota Tacoma ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the ABS Control Module for Antilock Brakes on 2003 Toyota Tacoma?
A: The first step of Hydraulic Control Assembly Antilock Brakes servicing requires disconnecting the connector followed by brake lines disconnection with Special Service Tool: 9023-00100 to free the 5 brake lines from the ABS actuator while maintaining a torque at 15 Nm (155 kgf-cm, 11 ft. lbs.). The ABS actuator assembly will come off after you remove its bolt and both 2 nuts while applying 19 Nm (195 kgf-cm, 14 ft. lbs.) torque. The next step involves the detachment of the ABS actuator by unscrewing all four nuts at 5.4 Nm (55 kgf-cm, 48 inch lbs.). The installation sequence should follow the reverse steps which were used for removal. Following this, fill the brake reservoir with fluid and perform brake system bleeding while checking for any fluid leakage.