My Garage
Cart

OEM 2002 Toyota Sequoia Evaporator

A/C Evaporator Core
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Evaporators found

  • 2002 Toyota Sequoia Evaporator - 88501-0C020
    2002 Toyota Sequoia Evaporator Diagram - 88501-0C020
    View related parts

    2002 Toyota Sequoia Evaporator Core, Front

    Part Number: 88501-0C020
    $322.69 MSRP: $460.73
    You Save: $138.04 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Evaporator Sub-Assembly; A/C Evaporator Core, Front; A/C Evaporator Core Repair Kit; Evaporator Sub-Assembly, Cooler; A/C Evaporator Core; A/C Evaporator; Evaporator
    • Position: Front
    • Part Name Code: 88501
    • Item Weight: 5.30 Pounds
    • Item Dimensions: 17.5 x 12.2 x 12.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 88501-0C020
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2002 Toyota Sequoia Submodels:
    • Limited, SR5 | 8 Cyl 4.7 L GAS
  • 2002 Toyota Sequoia Evaporator - 88510-0C030
    2002 Toyota Sequoia Evaporator Diagram - 88510-0C030
    View related parts
    Product Specifications
    • Other Name: Unit Assembly, Cooling; A/C Evaporator Core and Case Assembly; Unit Assembly, Cooler; A/C Evaporator
    • Part Name Code: 88510
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 88510-0C030
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    Fits the following 2002 Toyota Sequoia Submodels:
    • Limited, SR5 | 8 Cyl 4.7 L GAS
  • 2002 Toyota Sequoia Evaporator - 88501-0C030
    2002 Toyota Sequoia Evaporator Diagram - 88501-0C030
    View related parts
    Product Specifications
    • Other Name: Evaporator Sub-Assembly; A/C Evaporator Core, Rear; A/C Evaporator Core Repair Kit; Evaporator Sub-Assembly, Cooler; A/C Evaporator Core; A/C Evaporator; Evaporator
    • Position: Rear
    • Part Name Code: 88501D
    • Item Weight: 5.40 Pounds
    • Item Dimensions: 28.7 x 26.2 x 12.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 88501-0C030
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2002 Toyota Sequoia Submodels:
    • Limited, SR5 | 8 Cyl 4.7 L GAS

2002 Toyota Sequoia Evaporator

Looking for affordable OEM 2002 Toyota Sequoia Evaporator? Explore our comprehensive catalogue of genuine 2002 Toyota Sequoia Evaporator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2002 Toyota Sequoia Parts Questions & Experts Answers

  • Q: How to service and repair the evaporator core on 2002 Toyota Sequoia?
    A: The evaporator core service and repair task begins with refrigerant discharge from the system then evacuating air before adding 1050 plus or minus 50 g (37.03 plus or minus 1.76 oz.) of refrigerant while checking for any leaks. Remove the engine coolant from the radiator with care to maintain a small amount of coolant inside. After removing all mentioned components, including rear seat outer belt floor anchors, backdoor scuff plate and rear door scuff plate RH, upper back door garnish and rear window side garnish RH, rear quarter trim panel RH and quarter pillar garnish RH. Remove the 2 bolts connecting the suction tubes and liquid tubes while torquing them to 5.4 Nm then immediately secure the open fittings to protect the system against moisture or dirt entry. Install two new O-rings that are prepared with compressor oil onto the tubing. The air duct removal process starts with unclipping the 3 clips along with cover and proceeding to disconnect the 2 air ducts and wire harness clamps. Unscrew the expansion valve by removing its 4 screws and 2 brackets followed by packing removal while avoiding damage then use a 5.0 mm (0.20 in.) hexagon wrench to remove the 2 bolts (torque to 5.4 Nm (55 kgf-cm, 48 in.-lbf)) before separating the 3 bolts to lift the A/C unit until it frees the tube and accessory. To finish the process of removal you need to disconnect the evaporator by unfastening the 8 screws and cover before drawing out the evaporator. The installation steps require the opposite order of removal steps.

Related 2002 Toyota Sequoia Parts