How to replace the rear speed sensor on 2001 Toyota MR2 Spyder?

The replacement process requires the user to disconnect the rear speed sensor connector and remove the rear wheel. Start by removing the speed sensor grommet together with the clip. Then remove 2 clamp bolts and the bolt which fastens the speed sensor. Check that the sensor along with the knuckle installation area lacks foreign matter before securing the sensor with the bolt that must remain flat against the knuckle surface. Utilize the bolt to secure the new speed sensor at 8.0 Nm (82 kgf-cm, 71 inch lbs.) torque before tightening the body side clamp bolts to 19 Nm (195 kgf-cm, 14 ft. lbs.) while the upper arm side bolts require 5.0 Nm (51 kgf-cm, 44 inch lbs.). Install the grommet together with the clip followed by torquing the rear wheel to 76 ft. lbs. (103 Nm, 1,050 kgf-cm). End the procedure by connecting the speed sensor connector followed by a speed sensor signal verification.

OEM 2001 Toyota MR2 Spyder Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2001 Toyota MR2 Spyder Sensor
Part Number: 89413-17010
$136.05 MSRP: $192.60
You Save: $56.55 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Transmission; Sensor, Transmission Revolution
- Part Name Code: 89413B
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.5 x 2.4 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89413-17010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2001 Toyota MR2 Spyder Sensor Ring, Front
Part Number: 89544-52010
$209.57 MSRP: $257.02
You Save: $47.45 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor, Front, Front Left, Front Right; ABS Tone Ring; ABS Sensor; Front Speed Sensor; ABS Rotor
- Manufacturer Note: KOYO
- Position: Front
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.8 x 6.5 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89544-52010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2001 Toyota MR2 Spyder Speed Sensor, Rear Driver Side
Part Number: 89546-17030
$272.13 MSRP: $388.54
You Save: $116.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Left-Hand; ABS Wheel Speed Sensor, Rear Left; ABS Sensor; Rear Speed Sensor; Sensor, Speed, Rear Driver Side
- Position: Rear Driver Side
- Part Name Code: 89546
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.4 x 6.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89546-17030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2001 Toyota MR2 Spyder Speed Sensor, Rear Passenger Side
Part Number: 89545-17030
$264.21 MSRP: $377.23
You Save: $113.02 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Right-Hand; ABS Wheel Speed Sensor, Rear Right; ABS Sensor; Rear Speed Sensor; Sensor, Speed, Rear Passenger Side
- Position: Rear Passenger Side
- Part Name Code: 89545
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.3 x 6.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89545-17030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS

2001 Toyota MR2 Spyder Speed Sensor

Looking for affordable OEM 2001 Toyota MR2 Spyder Speed Sensor? Explore our comprehensive catalogue of genuine 2001 Toyota MR2 Spyder Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota MR2 Spyder Parts Questions & Experts Answers

Q: How to replace the rear speed sensor on 2001 Toyota MR2 Spyder?
A: The replacement process requires the user to disconnect the rear speed sensor connector and remove the rear wheel. Start by removing the speed sensor grommet together with the clip. Then remove 2 clamp bolts and the bolt which fastens the speed sensor. Check that the sensor along with the knuckle installation area lacks foreign matter before securing the sensor with the bolt that must remain flat against the knuckle surface. Utilize the bolt to secure the new speed sensor at 8.0 Nm (82 kgf-cm, 71 inch lbs.) torque before tightening the body side clamp bolts to 19 Nm (195 kgf-cm, 14 ft. lbs.) while the upper arm side bolts require 5.0 Nm (51 kgf-cm, 44 inch lbs.). Install the grommet together with the clip followed by torquing the rear wheel to 76 ft. lbs. (103 Nm, 1,050 kgf-cm). End the procedure by connecting the speed sensor connector followed by a speed sensor signal verification.