How to replace the rear speed sensor on 2000 Toyota MR2 Spyder?

The first step to replace the rear speed sensor requires users to disconnect the rear speed sensor connector and remove the rear wheel from the vehicle. Start by extracting the grommet along with the clip and then proceed to remove the two clamp bolts. After unbolted you can remove the speed sensor along with the bolt. You need to check that both the sensor surface and knuckle installation area have no foreign material before applying the sensor flat against the knuckle surface when tightening the bolt. Affix the new speed sensor bolt using 8.0 Nm torque followed by applying 19 Nm torque on the body side clamp bolts while maintaining 5.0 Nm torque on the upper arm side clamp bolts. Start by installing the grommet along with the clip before reinstalling the rear wheel using a torque of 103 Nm (1,050 kgf-cm, 76 ft. lbs.). Check the speed sensor signal after connecting its connector.

OEM 2000 Toyota MR2 Spyder Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Speed Sensors found

View related parts
2000 Toyota MR2 Spyder Sensor Ring, Front
Part Number: 89544-52010
$209.57 MSRP: $257.02
You Save: $47.45 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor, Front, Front Left, Front Right; ABS Tone Ring; ABS Sensor; Front Speed Sensor; ABS Rotor
- Manufacturer Note: KOYO
- Position: Front
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.8 x 6.5 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89544-52010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2000 Toyota MR2 Spyder Speed Sensor, Rear Driver Side
Part Number: 89546-17030
$272.13 MSRP: $388.54
You Save: $116.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Left-Hand; ABS Wheel Speed Sensor, Rear Left; ABS Sensor; Rear Speed Sensor; Sensor, Speed, Rear Driver Side
- Position: Rear Driver Side
- Part Name Code: 89546
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.4 x 6.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89546-17030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2000 Toyota MR2 Spyder Speed Sensor, Rear Passenger Side
Part Number: 89545-17030
$264.21 MSRP: $377.23
You Save: $113.02 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Right-Hand; ABS Wheel Speed Sensor, Rear Right; ABS Sensor; Rear Speed Sensor; Sensor, Speed, Rear Passenger Side
- Position: Rear Passenger Side
- Part Name Code: 89545
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.3 x 6.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89545-17030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota MR2 Spyder Submodels:
- Base | 4 Cyl 1.8 L GAS

2000 Toyota MR2 Spyder Speed Sensor

Looking for affordable OEM 2000 Toyota MR2 Spyder Speed Sensor? Explore our comprehensive catalogue of genuine 2000 Toyota MR2 Spyder Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2000 Toyota MR2 Spyder Parts Questions & Experts Answers

Q: How to replace the rear speed sensor on 2000 Toyota MR2 Spyder?
A: The first step to replace the rear speed sensor requires users to disconnect the rear speed sensor connector and remove the rear wheel from the vehicle. Start by extracting the grommet along with the clip and then proceed to remove the two clamp bolts. After unbolted you can remove the speed sensor along with the bolt. You need to check that both the sensor surface and knuckle installation area have no foreign material before applying the sensor flat against the knuckle surface when tightening the bolt. Affix the new speed sensor bolt using 8.0 Nm torque followed by applying 19 Nm torque on the body side clamp bolts while maintaining 5.0 Nm torque on the upper arm side clamp bolts. Start by installing the grommet along with the clip before reinstalling the rear wheel using a torque of 103 Nm (1,050 kgf-cm, 76 ft. lbs.). Check the speed sensor signal after connecting its connector.