OEM 2001 Toyota MR2 Spyder Fuel Pressure Regulator

2001 Toyota MR2 Spyder Parts Questions & Experts Answers

• Q: How to service the Fuel Pressure Regulator on 2001 Toyota MR2 Spyder?

  A: The service of the Fuel Pressure Regulator begins by removing the fuel pump and sender gauge assembly from the fuel tank followed by separating the fuel suction plate when disconnecting the fuel sender gauge connector and ground plate. Only after this can you properly install the fuel suction plate without harming the suction support and fuel suction plate before disconnecting the fuel pump connector. Service the Fuel Pressure Regulator by first extracting it along with its attached O-ring. Start the pressure regulator installation process by adding a new O-ring to the unit followed by applying gasoline on the O-ring before gently pushing the regulator from the back. You must first connect the fuel pump connector before installing the fuel suction plate onto the fuel filter assembly with the fuel pump. Afterward you should reconnect both the fuel sender gauge and its ground plate. The installation process ends by resetting both the fuel pump and sender gauge assembly to the fuel tank.