How to service the fuel pressure regulator on Toyota MR2 Spyder?

The process to service the fuel pressure regulator requires you to begin by taking out the fuel pump and sender gauge assembly from the fuel tank then proceeding to detach the fuel suction plate by removing the fuel sender gauge connector and ground plate after which you should use two screwdrivers to separate the fuel suction plate but maintain careful handling of the suction support and fuel suction plate before disconnecting the fuel pump connector. The next step should involve pulling the fuel pressure regulator out before removing its O-ring. To install the pressure regulator begin by placing the new O-ring onto its surface before applying gasoline to the O-ring which you will then push into position. Link the fuel pump connector before adding the fuel suction plate to the fuel filter and fuel pump assembly and finally reattach the fuel sender gauge connector with the ground plate. Reinstall the fuel pump together with the sender gauge assembly onto the fuel tank.

OEM Toyota MR2 Spyder Fuel Pressure Regulator

Fuel Tank Pressure Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Regulator found

View related parts
Toyota MR2 Spyder Fuel Pressure Regulator
Part Number: 23280-22010
$80.57 MSRP: $113.09
You Save: $32.52 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Pressure Regulator; Regulator Assembly, Fuel Pressure
- Manufacturer Note: TYPE B:REFER TO ILLUSTRATION
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS

Toyota MR2 Spyder Fuel Pressure Regulator

Choose genuine Fuel Pressure Regulator that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Fuel Pressure Regulator for your Toyota MR2 Spyder? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota MR2 Spyder parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Fuel pressure regulator for spyder products for Toyota MR2 Spyder is a very important part of the spyder alternatives in electronic fuel injection system that enables constant fuel pressure for the vehicle and increases horsepower. This regulator which is often fitted on the fuel rail, uses spring and diaphragm to manipulate fuel flow depending on vacuum in the engine to allow the fuel to be pumped back to the tank when the car is idling and provide enough pressure when the car accelerates. There have been several fuel pressure regulators featuring the Toyota MR2 Spyder; the adjustable ones are for modified fuel systems which are critical in correcting the air/fuel mixture for optimized fuel injection especially when enhanced fuel injectors or high voltage pumps have been installed. With regard to the Toyota MR2 Spyder Fuel Pressure Regulator, it is rather reliable as it is a safety and performance component part of the vehicle. Fitted precisely for MR2 Spyder manufactured between 1999 and 2007, this regulator is suitable for daily use as well as race car configurations. Specifically, the Toyota MR2 Spyder Fuel Pressure Regulator is notable in the automotive market as it commonly has a solid construction often made of billet aluminum thus increasing its durability and ease of tuning. The Toyota MR2 Spyder Fuel Pressure Regulator is a reliable and high performing essential part of the Toyota MR2 Spyder that allows the drivers to have optimum and maximized enjoyable drive.

Toyota MR2 Spyder Fuel Pressure Regulator Parts and Q&A

Fuel Pressure Regulator
23280-22010
Q: How to service the fuel pressure regulator on Toyota MR2 Spyder?
A:
The process to service the fuel pressure regulator requires you to begin by taking out the fuel pump and sender gauge assembly from the fuel tank then proceeding to detach the fuel suction plate by removing the fuel sender gauge connector and ground plate after which you should use two screwdrivers to separate the fuel suction plate but maintain careful handling of the suction support and fuel suction plate before disconnecting the fuel pump connector. The next step should involve pulling the fuel pressure regulator out before removing its O-ring. To install the pressure regulator begin by placing the new O-ring onto its surface before applying gasoline to the O-ring which you will then push into position. Link the fuel pump connector before adding the fuel suction plate to the fuel filter and fuel pump assembly and finally reattach the fuel sender gauge connector with the ground plate. Reinstall the fuel pump together with the sender gauge assembly onto the fuel tank.

Related Toyota MR2 Spyder Parts

Browse Toyota MR2 Spyder Fuel Pressure Regulator by Years

2005 2004 2003 2002 2001 2000