How to service the ignition coil on 2001 Toyota Land Cruiser?

Service of the ignition coil starts by taking out both the V-bank cover and the intake air connector. The engine wire needs disconnecting from the LH cylinder head cover through the removal of two wire clamps together with the engine wire. To initiate work on the ignition coil (with igniter) you need to break its connector loose. The ignition coils with igniter can be freed from the spark plugs by unscrewing the bolt then extracting the combination of ignition coil and igniter. To replace the ignition coils (with igniter) staff must remove eight total units while applying torque at 7.5 N.m (80 kgf.cm, 66 in.lbf). The installation procedure must be done in the opposite sequence of disassembly.

OEM 2001 Toyota Land Cruiser Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2001 Toyota Land Cruiser Coil, Ignition
Part Number: 90919-02259
$86.26 MSRP: $121.08
You Save: $34.82 (29%)
ADD TO CART
Product Specifications
- Other Name: Direct Ignition Coil; Ignition Coil
- Replaces: 90919-02249, 90080-19027
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.5 x 2.1 x 8.8 inches
- Condition: New
- SKU: 90919-02259
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Land Cruiser Submodels:
- Base | 8 Cyl 4.7 L GAS

2001 Toyota Land Cruiser Ignition Coil

Looking for affordable OEM 2001 Toyota Land Cruiser Ignition Coil? Explore our comprehensive catalogue of genuine 2001 Toyota Land Cruiser Ignition Coil. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Land Cruiser Parts Questions & Experts Answers

Q: How to service the ignition coil on 2001 Toyota Land Cruiser?
A: Service of the ignition coil starts by taking out both the V-bank cover and the intake air connector. The engine wire needs disconnecting from the LH cylinder head cover through the removal of two wire clamps together with the engine wire. To initiate work on the ignition coil (with igniter) you need to break its connector loose. The ignition coils with igniter can be freed from the spark plugs by unscrewing the bolt then extracting the combination of ignition coil and igniter. To replace the ignition coils (with igniter) staff must remove eight total units while applying torque at 7.5 N.m (80 kgf.cm, 66 in.lbf). The installation procedure must be done in the opposite sequence of disassembly.