How to service the ignition coil on 2002 Toyota Land Cruiser?

A service of the ignition coil requires users to detach both the V-bank cover and the intake air connector. Service of the ignition coil begins by disconnecting two wire clamps and the engine wire from the LH cylinder head cover. The next step involves removing electrical connectors from staples while pulling out the ignition coil assemblies (with igniter) from their spark plug positions by removing bolts first. Eight ignition coils containing igniters need to be detached where each coil must receive installation torque application at 7.5 N.m (80 kgf.cm, 66 in.lbf). The reinstallation sequence should proceed in the opposite order of removal.

OEM 2002 Toyota Land Cruiser Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2002 Toyota Land Cruiser Coil, Ignition
Part Number: 90919-02259
$86.26 MSRP: $121.08
You Save: $34.82 (29%)
ADD TO CART
Product Specifications
- Other Name: Direct Ignition Coil; Ignition Coil
- Replaces: 90919-02249, 90080-19027
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.5 x 2.1 x 8.8 inches
- Condition: New
- SKU: 90919-02259
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Land Cruiser Submodels:
- Base | 8 Cyl 4.7 L GAS

2002 Toyota Land Cruiser Ignition Coil

Looking for affordable OEM 2002 Toyota Land Cruiser Ignition Coil? Explore our comprehensive catalogue of genuine 2002 Toyota Land Cruiser Ignition Coil. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2002 Toyota Land Cruiser Parts Questions & Experts Answers

Q: How to service the ignition coil on 2002 Toyota Land Cruiser?
A: A service of the ignition coil requires users to detach both the V-bank cover and the intake air connector. Service of the ignition coil begins by disconnecting two wire clamps and the engine wire from the LH cylinder head cover. The next step involves removing electrical connectors from staples while pulling out the ignition coil assemblies (with igniter) from their spark plug positions by removing bolts first. Eight ignition coils containing igniters need to be detached where each coil must receive installation torque application at 7.5 N.m (80 kgf.cm, 66 in.lbf). The reinstallation sequence should proceed in the opposite order of removal.