Other Name: Unit Sub-Assembly, Radiator; HVAC Heater Core, Rear; Core; Unit Sub-Assembly, Rear Heater; HVAC Heater Core
Part Name Code: 87107R
Item Weight: 1.60 Pounds
Item Dimensions: 13.7 x 12.2 x 8.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 87107-35040
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
2000 Toyota 4Runner Heater Core
Looking for affordable OEM 2000 Toyota 4Runner Heater Core? Explore our comprehensive catalogue of genuine 2000 Toyota 4Runner Heater Core. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2000 Toyota 4Runner Parts Questions & Experts Answers
Q: How to Service and Repair the Heater Core in a Rear Heater Unit on 2000 Toyota 4Runner?
A: A repair or servicing session for the rear heater unit must start with removing the blower resistor alongside the rear heater relay and the wire harness. The first step is to remove both heater cases and their radiator by disconnecting the wire harness clamps followed by unscrewing 4 fasteners while unclipping 5 additional locking components of the heater cases. Proceed with the removal of the 2 screws along with the heater radiator followed by the 2 screws paired with the 2 piping clamps until both 2 screws and 2 heater radiator pipes are removed. The blower motor removal begins by dissembling the wire harness clamps followed by unscrewing four fasteners and unclipping five pieces until the heater cases separate. The blower motor requires removal of three screws along with the blower fan nut. After completing disassembly one must return each part in the opposite sequence it was separated.