2006 Toyota Avalon Airbag, Clock Spring, Air Bag Sensor

Air Bag Sensor, Airbag, Clock Spring Installation and Repair Tips for 2006 Toyota Avalon

• Q: How to replace the Rear Left Air Bag Sensor on 2006 Toyota Avalon?

  A: When the replacement of the Rear Left Air Bag Sensor is required, you should disconnect the negative terminal on the battery and wait 90 seconds. Take out required seat parts, take out the sensor, and put the new sensor in with a 9.0 N. m. torque, reconnect battery, and set up the power seat system. Check the SRS warning light.
• Q: How to replace the Clock Spring Assembly / Spiral Cable on 2006 Toyota Avalon?

  A: In order to replace Clock Spring Assembly, it is important to be safe and follow the Air Bag guidelines and disconnect the battery. Install the wheels in a straight position, take away the required parts and check the clock spring whether it has defects or not. Attach the new assembly, reconnect the components and check and adjust the system accordingly.
• Q: What is the purpose of the activation prevention mechanism in the SRS Airbag system squib circuit on 2006 Toyota Avalon?

  A: The activation prevention mechanism in the Air Bag sensor assembly connector prevents accidental activation by closing the circuit when disconnected. To release it, insert a piece of paper matching the male terminal thickness between the terminals and the short spring. Never release this mechanism unless directed by troubleshooting procedures.