2005 Scion xB Airbag, Clock Spring, Air Bag Sensor

Air Bag Sensor, Airbag, Clock Spring Installation and Repair Tips for 2005 Scion xB

• Q: How to Replace the Air Bag Sensor Front LH on 2005 Scion xB?

  A: To remove the Air Bag Sensor Front LH, watch the service precautions and disconnection of the battery negative terminal. Unscrew bolts by removing the air cleaner inlet and sensor by disconnecting connector. Turn off the ignition and examine the defects prior to installation. Reconnect sensor and test SRS warning light.
• Q: What steps should be taken to check the Airbag system after a collision on 2005 Scion xB?

  A: Check Air Bag system after a crash. In case of undamaged vehicles look at the cracks or discoloration of the horn button. In affected vehicles, inspect the signs of damage and change the horn button when it is deformed. Check the passenger Air Bag assembly, wire harness, and seat belt assembly and replace any parts that are damaged.
• Q: How to replace the Clock Spring Assembly / Spiral Cable on 2005 Scion xB?

  A: To change the Clock Spring Assembly, or to disassemble it, you are required to disconnect battery, steering column cover, horn and steering wheel assemblies and remove the cover. Take out the clock spring sub-assembly, check it against possible damage, and replace it with a new one. Install, and recheck the steering wheel and horn button making sure the SRS warning light is lit.