Toyota 86160-02770
Door Speaker, Rear

Fasten the No. 1 speaker assembly with box using four bolts while connecting the connector. The side deck trim panel assembly installation comes after which you should proceed with the No. 1 luggage compartment trim hook installation and follow the identical process for both right-hand (RH) and left-hand (LH) sides. The process for both sides should remain identical when installing the luggage hold belt striker assembly. The installation process for the rear seat 3 point type belt assembly must be performed once for each side while also installing the rear seat side garnish and the rear seatback hinge sub-assembly. Mount the back deck trim cover along with the luggage compartment tray before inserting the child restraint seat tether anchor. Install deck floor boxes starting with RH and LH then proceed to install jack assemblies along with their carriers. Construct the assembly by installing the deck board numbered 2 then the deck board components followed by the tonneau cover components. The process continues with assembly of rear seatback components including rear seatback inner hinge cover and rear seatback outer hinge cover. The next sequence includes installation of the rear seat center outer belt assembly combined with the rear seat center headrest assembly together with the rear seat headrest assembly and the rear seat cushion assembly. The installation of rear door opening trim Weather Strip along with rear door scuff plate should follow the same sequence for the RH and LH sides.

Installation of the rear speaker assembly requires attaching it with 4 bolts while establishing a connector connection. The package tray trim panel assembly needs installation if the vehicle does not include a rear spoiler while vehicles with the spoiler require proper installation steps. The next step should be to put on the package tray trim belt hole cover. Mount the roof side inner garnish assembly LH before moving onto the roof side inner garnish board LH and the rear seat side garnish LH. Put in place the rear door opening trim Weather Strip LH together with the rear door scuff plate LH. The right-hand side installation requires the roof side inner garnish assembly RH followed by the roof side inner garnish board RH and rear seat side garnish RH and concluding with rear door opening trim Weather Strip RH then rear door scuff plate RH. After installing the rear seatback assemblies on both sides, cowl forward of the seat rails then the rear seat cushions get added. To conclude installation place the rear seat center headrest assembly followed by the rear seat headrest assembly LH along with the rear seat headrest assembly RH then put on the spare wheel cover.

The removal of the rear No. 3 speaker assembly requires starting with the removal of the rear door scuff plate LH and the rear door opening trim Weather Strip LH. Beginning by removing the tonneau cover assembly (w/ Tonneau Cover) users should then take off the deck board assembly and its sub-assemblies including No. 3 deck board sub-assembly and deck side trim box LH. The next series of steps should begin with No. 2 deck board sub-assembly together with deck side trim box RH and No. 1 deck board removal. You should first remove the rear seat sub floor panel assembly and after that remove the rear floor finish plate. The service technician should remove the rear seat headrest assembly and the rear seat inner track bracket cover and the rear seat outer track bracket cover in sequence. Detach the rear seat No. 2 reclining control cable sub-assembly to proceed with the removal of the rear seat assembly LH. The following steps include taking off the reclining remote control bezel LH and the luggage hold belt striker assembly (for LH Side). First remove the rear seat outer belt assembly LH before taking out the deck trim side panel assembly LH together with the roof side inner garnish assembly LH. To detach the rear No. 3 speaker assembly dismiss the clamp while removing its two bolts.

Remove the front armrest upper base panel for both configurations, with and without a power window.

Remove the rear seatback hinge sub-assembly and rear seat side garnish.

Install the rear seat headrest assembly.