Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 89544-32040
ABS Sensor, Rear

2000-2010 Toyota 8954432040

Customer Questions & Expert Answers (22)
Toyota 89544-32040 ABS Sensor, Rear
  • Part Description
    Sensor, Skid Control; ABS Wheel Speed Sensor, Rear Left, Rear Right
  • Part Name Code
    89544
  • Position
    Rear
  • Replaces
    89544-32030, 89544-32010
  • Manufacturer
    Toyota
Make sure this part fits
$188.02 MSRP: $230.59
You Save: $42.57 (19%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • 2001 Toyota Celica ABS Sensor, Rear Diagram for 89544-32040
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 89544-32040

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code89544
    Manufacturer Part Number89544-32040
    Part DescriptionSensor, Skid Control; ABS Wheel Speed Sensor, Rear Left, Rear Right
    Other NamesSensor Ring; Rear Sensor Ring; Sensor; ABS Wheel Speed Sensor
    Manufacturer NoteKOYO
    Item Dimensions3.3 x 2.8 x 2.1 inches
    Item Weight0.80 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces89544-32030, 89544-32010
    Require Quantity2
    ManufacturerToyota
    SKU89544-32040
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Scion tCBase, Spec4 Cyl 2.4 L GAS
    2000-2005 Toyota CelicaGT, GTS4 Cyl 1.8 L GAS
    2001-2005 Toyota RAV4Base, L, Sport4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

  • Customer Questions & Expert Answers

    Q:
    Can you provide the right 89544-32040 for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 89544-32040 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the next installation step after the speed sensor for the 2008 Scion tC? Posted by Customer
    A:
    Install the front fender liner LH, followed by the front wheel, which should be torqued to 103 Nm (1,050 kgf-cm, 76 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What should be done after installing the rear wheel for the 2008 Scion tC? Posted by Customer
    A:
    Connect the skid control sensor wire and install the rear wheel, torquing it to 103 Nm (1,050 kgf-cm, 76 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What should be checked before installing the new speed sensor for the 2007 Scion tC? Posted by Customer
    A:
    Ensure the sensor tip and installation hole are free from foreign matter.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What should you be aware of after reconnecting the cable for the 2010 Scion tC? Posted by Customer
    A:
    Some systems may require initialization after reconnecting the cable.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the installation process for the NT sensor for the 2005 Scion tC? Posted by Customer
    A:
    Coat its O-ring with ATF, install it with the bolt, and torque it to 11 Nm (115 kgf-cm, 8 ft. lbs.), followed by connecting the speed sensor connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What torque should be applied to the front wheel for the 2010 Scion tC? Posted by Customer
    A:
    The front wheel should be torqued to 103 Nm (1,050 kgf-cm, 76 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the next step after attaching the speed sensor for the 2009 Scion tC? Posted by Customer
    A:
    Connect the sensor's connector and attach the clamp.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the torque specification for securing the input turbine speed sensor for the 2005 Toyota Celica? Posted by Customer
    A:
    Torque the bolt to 5.4 Nm (55 kgf-cm, 48 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the first step to service and repair the Transmission Speed Sensor for the 2000 Toyota Celica? Posted by Customer
    A:
    Remove the battery, ECM, and ECM case, followed by the ECM bracket.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What are the final steps after installing the speed sensor for the 2006 Scion tC? Posted by Customer
    A:
    Reconnect the connector, attach the clamp, reinstall the front fender liner and front wheel with a torque of 103 N.m (1,050 kgf.cm, 76 ft.lbf), and reconnect the cable to the negative battery terminal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How do you remove the speed sensor from the rear axle hub for the 2005 Toyota Celica? Posted by Customer
    A:
    Remove the speed sensor with the rear axle hub by driving out the 2 pins using a pin punch and hammer to detach the 2 attachments from Special Service Tool: 09520-00031.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How do you remove the counter gear speed sensor for the 2001 Toyota Celica? Posted by Customer
    A:
    Disconnect the counter gear speed sensor connector and remove it by taking out the bolt and O-ring.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the torque specification for attaching the vehicle speed sensor assembly for the 2002 Toyota Celica? Posted by Customer
    A:
    Ensure a torque of 5.5 Nm (56 kgf-cm, 49 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What should be done after securing the sensor assembly for the 2004 Toyota Celica? Posted by Customer
    A:
    Reconnect the vehicle speed sensor connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the first step to service and repair the Vehicle Speed Sensor for the 2003 Toyota Celica? Posted by Customer
    A:
    Remove the battery, ECM, and ECM case, followed by the ECM bracket.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What tools are needed during disassembly for the 2WD 2005 Toyota RAV4? Posted by Customer
    A:
    A pin punch and hammer to drive out the 2 pins and remove the 2 attachments from Special Service Tool: 09520-00031.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the first step in reassembly for the 2003 Toyota RAV4? Posted by Customer
    A:
    Clean the contacting surface of the axle hub and the new ABS speed sensor.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is involved in removing the speed sensor for the 2001 Toyota RAV4? Posted by Customer
    A:
    Disconnect the sensor connector from the sensor harness, remove the sensor connector from the body, and take off the harness clamp from the body.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the first step to service the transmission speed sensor for the 2004 Toyota RAV4? Posted by Customer
    A:
    Begin by removing the input turbine speed sensor: disconnect the connector, remove the bolt, and take out the sensor along with its O-ring.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the torque specification for the bolts securing the sensor wire harness to the suspension arm for the 2002 Toyota RAV4? Posted by Customer
    A:
    The bolts should be torqued to 19 Nm (194 kgf-cm, 14 ft. lbs.) for the suspension arm.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What tool is used during disassembly for 2WD for the 2001 Toyota RAV4? Posted by Customer
    A:
    Use a pin punch and hammer to drive out the 2 pins and remove the 2 attachments from Special Service Tool: 09520-00031.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 89544-32040, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 89544-32040 ABS Sensor, Rear. It is sometimes referred to as Toyota Speed Sensor. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 8954432040 ABS Sensor, Rear. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery