Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 13054-20030
Camshaft Sub-Assembly

2004-2010 Toyota 1305420030

Customer Questions & Expert Answers (18)
Toyota 13054-20030 Camshaft Sub-Assembly
  • Part Description
    Camshaft
  • Part Name Code
    13054
  • Replaces
    13054-0A040, 13054-0A041
  • Manufacturer
    Toyota
Make sure this part fits
$291.70 MSRP: $416.49
You Save: $124.79 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 13054-20030 Camshaft Sub-Assembly is Ref No. 16 in the diagram below

    2005 Toyota Sienna Camshaft Sub-Assembly Diagram for 13054-20030
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 13054-20030

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code13054
    Manufacturer Part Number13054-20030
    Part DescriptionCamshaft
    Item Dimensions21.6 x 3.5 x 3.1 inches
    Item Weight5.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces13054-0A040, 13054-0A041
    ManufacturerToyota
    SKU13054-20030
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2006 Toyota CamrySE6 Cyl 3.3 L GAS
    2004-2010 Toyota HighlanderBase, Hybrid, Hybrid Limited, Limited, Sport6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
    2004-2006 Toyota SiennaCE, LE, Limited, XLE, XLE Limited6 Cyl 3.3 L GAS
    2004-2008 Toyota SolaraSE, SE Sport, SLE, Sport6 Cyl 3.3 L GAS

  • Customer Questions & Expert Answers

    Q:
    Is 13054-20030 a good match for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 13054-20030 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the first step to replace the camshaft (RH) for the 2004 Toyota Camry? Posted by Customer
    A:
    First, drain the engine coolant.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What is the process for No. 2 camshaft installation for the 2005 Toyota Camry? Posted by Customer
    A:
    Align the painted mark of the link with the timing mark of the camshaft timing sprocket, temporarily tighten the sprocket bolt, install the bearing caps and bolts, and tighten the sprocket bolt to 54 Nm (551 kgf-cm, 40 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done with the fringe bolt on the camshaft timing gear for the 2006 Toyota Highlander? Posted by Customer
    A:
    Remove the fringe bolt from the camshaft timing gear, ensuring not to remove the other 4 bolts, and if reusing the camshaft timing gear assembly, release the straight pin lock before installation.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What is the torque specification for temporarily tightening the bearing cap bolts for the 2008 Toyota Highlander? Posted by Customer
    A:
    10 Nm (102 kgf-cm, 7 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What should be checked before removing the fringe bolt for the 2005 Toyota Highlander? Posted by Customer
    A:
    Check that the camshaft timing gear can be turned to the advanced angle side by hand.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to service the camshaft for the 2007 Toyota Highlander? Posted by Customer
    A:
    Begin by removing the front wheel RH, front fender splash shield front RH, front fender apron seal RH, engine cover sub-assembly No.1, ignition coil assembly, spark plug, ventilation hoses No.1 and No.2, and engine wire, followed by the cylinder head cover sub-assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What are the steps for the No. 2 camshaft (exhaust) installation for the 2004 Toyota Highlander? Posted by Customer
    A:
    Align it with the timing mark of the camshaft timing sprocket, temporarily tighten the sprocket bolt, install the bearing caps and bolts, and tighten them as specified.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you remove the camshaft timing gears and No. 2 chain for Bank 1 for the 2008 Toyota Highlander? Posted by Customer
    A:
    Raise the No. 2 chain tensioner assembly and insert a 1.0 mm pin to fix it, then hold the hexagonal portion of the camshaft with a wrench to remove the 2 bolts and 2 camshaft timing gear assemblies.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What should be repeated for the camshaft timing exhaust gear assembly for the 2009 Toyota Highlander? Posted by Customer
    A:
    Repeat the same process as for the camshaft timing gear assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you set No. 1 cylinder to TDC/compression for the 2004 Toyota Solara? Posted by Customer
    A:
    Turn the crankshaft pulley to align its groove with the timing mark 0 of the timing chain cover, ensuring the timing marks of the camshaft timing gear and sprocket align with the bearing caps, and place paint marks on the timing chain.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you install the cylinder head cover sub-assembly for the 2007 Toyota Solara? Posted by Customer
    A:
    Remove old packing, apply seal packing to the specified locations, and tighten the cover with 8 bolts and 2 nuts to 11 Nm (110 kgf-cm, 8 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What should you check regarding the camshaft timing gear for the 2008 Toyota Solara? Posted by Customer
    A:
    Check that the camshaft timing gear can be turned by hand to the advanced angle side.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What is the procedure for camshaft timing gear assembly removal for the 2006 Toyota Solara? Posted by Customer
    A:
    Fix the No.1 camshaft in a vise, cover all paths with vinyl tape except the advanced side, and apply about 150 kPa (1.5 kgf/cm2, 21 psi) of air pressure to the port on the advanced angle side. Remove the fringe bolt from the camshaft timing gear, ensuring not to remove the other 4 bolts.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What is the procedure for the No.1 chain tensioner assembly for the 2008 Toyota Solara? Posted by Customer
    A:
    Raise the ratchet pawl, push in the plunger, and secure it with the hook, then install a new gasket and the chain tensioner with 2 nuts, tightening to 9.0 Nm (92 kgf-cm, 80 in-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after reassembling the components for the 2006 Toyota Sienna? Posted by Customer
    A:
    Inspect and adjust the valve clearance, install the cylinder head cover, ignition coil assembly, intake air surge tank, and other components, reconnecting hoses and adding coolant while checking for leaks.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What should be repeated for the No. 3 camshaft sub-assembly for the 2006 Toyota Sienna? Posted by Customer
    A:
    Repeat the oil application and alignment of timing marks before installing the bearing caps and bolts.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What should you ensure when installing the camshaft timing gear assembly for the 2005 Toyota Solara? Posted by Customer
    A:
    Ensure no clearance between the gear's fringe and the camshaft before tightening the fringe bolt to 54 Nm (551 kgf-cm, 40 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 13054-20030, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 13054-20030 Camshaft Sub-Assembly. It is sometimes referred to as Toyota Camshaft. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 1305420030 Camshaft Sub-Assembly. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery