How to remove the Hood Release Cable on Toyota Venza?

The first step to remove the Hood Release Cable requires removing the front wheel LH followed by taking out the front fender outside moulding LH. The removal starts with turning the pin 90 degrees to free the pin hold clip followed by unfastening 8 screws, 1 bolt and 4 clips and 3 grommets. Replace the grommets because they easily break when removed. The sequence is to detach the cool air intake duct seal, radiator grille protector and radiator grille. Move on to separate the high pitched horn system from its mount. To detach the hood lock assembly from the vehicle without the engine hood courtesy switch, first remove the hood lock nut cap using a screwdriver followed by taping the tip for safety purposes, then discard the hood lock control cable and remove 3 bolts from their locations. The process of separating the hood lock assembly includes removing its nut cap while disconnecting the connector before removing 3 bolts to disconnect the control cable then taking out the assembly when it includes the engine hood courtesy switch. Next remove the front door scuff plate on the left-hand side followed by the cowl side trim sub-assembly on the left-hand side and lower No. 1 instrument panel finish panel. Disengage the clamps of the hood lock control cable assembly with a screwdriver after taping the tip for protection and draw out the assembly from the engine compartment for completion of the removal process.

OEM Toyota Venza Hood Release Cable

Hood Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Hood Release Cables found

View related parts
Toyota Venza Cable Handle, Front Part Number: 53611-AA010-C0
$13.73 MSRP: $19.11
You Save: $5.38 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Hood Lock Control; Hood Release Handle, Front; Release Lever; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: BLACK,TRIM2#
- Position: Front
- Replaces: 53611-12040-C0, 53611-12040-A0, 53611-12040-B3, 53611-12040-B7
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2015 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Cable Handle, Front Part Number: 53611-AA010-A0
$13.73 MSRP: $19.11
You Save: $5.38 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Hood Lock Control; Hood Release Handle, Front; Release Lever; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: IVORY,TRIM0#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Cable Handle, Gray, Front Part Number: 53611-AA010-B3
$15.52 MSRP: $21.61
You Save: $6.09 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Hood Lock Control; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Release Cable, Front Part Number: 53630-48130
$35.36 MSRP: $49.22
You Save: $13.86 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2024 Toyota Venza | LE, Limited, Nightshade, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Release Cable, Front Part Number: 53630-0T010
$36.56 MSRP: $50.88
You Save: $14.32 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Lever Sub-Assembly, Hood Lock Control, Front Part Number: 53601-30100-C0
$47.79 MSRP: $66.52
You Save: $18.73 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2024 Toyota Venza | LE, Limited, Nightshade, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)

Toyota Venza Hood Release Cable

Choose genuine Hood Release Cable that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Hood Release Cable for your Toyota Venza? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Venza parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Toyota Venza Hood Release Cable links the interior release handle to the hood latch assembly. The release lever is connected to the Venza latch system in such a way that pulling the lever tightens the line and disengages the catch to pop the hood up. This provides access to the engine components. A cable connects the inner handle to a junction beneath the hood before splitting the connection to each latch. The Hood Release Cable runs continuously from the inner handle to each latch. With time, the flexible casing may crack and become moistened, leading to limited service life. The hood line may become damaged or stretched, causing the hood to become stuck in the latched position. Keeping the Hood Release Cable clear of damage ensures quick opening when needed. If the hood won't release, checking the Hood Release Cable for wear gives a direct indication of the issue. Because Toyota focuses on real usability with their designs, the Venza makes use of simple pull mechanicals. A damaged Hood Release Cable can be replaced to restore normal operation on any Toyota Venza model.

Toyota Venza Hood Release Cable Parts and Q&A

Release Cable, Front
53630-0T010
Q: How to remove the Hood Release Cable on Toyota Venza?
A:
The first step to remove the Hood Release Cable requires removing the front wheel LH followed by taking out the front fender outside moulding LH. The removal starts with turning the pin 90 degrees to free the pin hold clip followed by unfastening 8 screws, 1 bolt and 4 clips and 3 grommets. Replace the grommets because they easily break when removed. The sequence is to detach the cool air intake duct seal, radiator grille protector and radiator grille. Move on to separate the high pitched horn system from its mount. To detach the hood lock assembly from the vehicle without the engine hood courtesy switch, first remove the hood lock nut cap using a screwdriver followed by taping the tip for safety purposes, then discard the hood lock control cable and remove 3 bolts from their locations. The process of separating the hood lock assembly includes removing its nut cap while disconnecting the connector before removing 3 bolts to disconnect the control cable then taking out the assembly when it includes the engine hood courtesy switch. Next remove the front door scuff plate on the left-hand side followed by the cowl side trim sub-assembly on the left-hand side and lower No. 1 instrument panel finish panel. Disengage the clamps of the hood lock control cable assembly with a screwdriver after taping the tip for protection and draw out the assembly from the engine compartment for completion of the removal process.