How to remove the exhaust pipe on Toyota Venza?

Begin by putting on protective gloves while ensuring the exhaust pipe reaches safe operating temperature before attempting to remove it due to its hot surface. Start by removing the heated oxygen sensor from the vehicle. Use a plastic hammer to perform even tapping on the tail exhaust pipe baffle sub-assembly. The tail exhaust pipe assembly should be removed through two bolt and two spring removal followed by disconnecting it from four exhaust pipe supports before taking out the exhaust pipe gasket from the center pipe assembly. First detach the center exhaust pipe assembly by eliminating its 2 bolts at the exhaust pipe supports while taking out the 2 supports and removing its gasket from the pipe assembly. Complete the front exhaust pipe assembly removal by unfastening two bolts, two compression springs and the component while removing the gasket on the exhaust manifold converter sub-assembly.

How to install the exhaust pipe assembly on Toyota Venza?

Before installation of the exhaust pipe assembly the technician must measure compression spring length with a vernier caliper to replace the spring if it is shorter than 41.5 mm (1.64 in.). Fully insert a new gasket into the exhaust manifold converter sub-assembly while using a plastic hammer and wooden block to press it until flush with the surface. Install it with correct direction and avoid reuse and damage. Screw the front exhaust pipe assembly to 2 bolts and 2 compression springs before torquing them to 43 Nm (438 kgf-cm, 32 ft-lbf). You must apply a new gasket to the center exhaust pipe assembly followed by its connection to the 2 exhaust pipe supports then tighten 2 bolts to 43 Nm (438 kgf-cm, 32 ft-lbf). To install the tail exhaust pipe assembly check the free length of the compression springs and replace them whenever the measurement falls under 38.5 mm (1.52 in.). Irrespective of safety measures, install another gasket onto the center exhaust pipe assembly while tapping it until it becomes flush. Fasten the 2 bolts together with 2 compression springs to the 4 exhaust pipe supports while torquing them to 43 Nm (438 kgf-cm, 32 ft-lbf). Stick the concave surface of tail exhaust pipe baffle sub-assemblies to matching protuberances of the tail exhaust pipe assembly before tapping them uniformly with a plastic hammer. Install the heated oxygen sensor and check exhaust gas leaks as the last step of the process.

OEM Toyota Venza Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Exhaust Pipes found

View related parts
Toyota Venza Intermed Pipe, Center
Part Number: 17420-0V010
$1034.20 MSRP: $1388.20
You Save: $354.00 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe, Rear; Exhaust Pipe; Center Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2012 Toyota Venza | Base, LE, XLE | 4 Cyl 2.7 L GAS
View related parts
Toyota Venza Front Pipe
Part Number: 17410-0V010
$183.01 MSRP: $239.33
You Save: $56.32 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Crossover Pipe, Front; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, XLE | 4 Cyl 2.7 L GAS
View related parts
Toyota Venza Front Pipe
Part Number: 17410-0P310
$228.56 MSRP: $298.89
You Save: $70.33 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Front Pipe
Part Number: 17403-0P060
$183.01 MSRP: $239.33
You Save: $56.32 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Sub-Assembly, Exhaust; Exhaust Crossover Pipe; Exhaust Pipe; Exhaust Y Pipe; Connector Pipe; Pipe Sub-Assembly, Exhaust, Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Muffler & Pipe
Part Number: 17430-25241
$481.34 MSRP: $646.10
You Save: $164.76 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Replaces: 17430-25240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Muffler
Part Number: 17430-0V012
$563.97 MSRP: $757.01
You Save: $193.04 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Pipe Assembly, Exhaust, Tail
- Replaces: 17430-0V011, 17430-0V010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, XLE | 4 Cyl 2.7 L GAS
View related parts
Toyota Venza Muffler
Part Number: 17430-0P170
$603.01 MSRP: $809.42
You Save: $206.41 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Pipe Assembly, Exhaust, Tail
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Intermed Pipe, Center
Part Number: 17420-0V251
$859.98 MSRP: $1154.34
You Save: $294.36 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe, Rear; Exhaust Pipe; Center Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Replaces: 17420-0V250
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2015 Toyota Venza | LE, XLE | 4 Cyl 2.7 L GAS
View related parts
Toyota Venza Intermed Pipe, Center
Part Number: 17420-0V241
$859.98 MSRP: $1154.34
You Save: $294.36 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe, Rear; Exhaust Pipe; Center Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Replaces: 17420-0V240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2015 Toyota Venza | LE, XLE | 4 Cyl 2.7 L GAS
View related parts
Toyota Venza Intermed Pipe, Center
Part Number: 17420-0V030
$1034.20 MSRP: $1388.20
You Save: $354.00 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe, Rear; Exhaust Pipe; Center Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2012 Toyota Venza | Base, LE, XLE | 4 Cyl 2.7 L GAS
View related parts
Toyota Venza Intermed Pipe, Center
Part Number: 17420-0P271
$1006.05 MSRP: $1350.42
You Save: $344.37 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe; Exhaust Pipe; Center Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Replaces: 17420-0P270
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2015 Toyota Venza | LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Intermed Pipe, Center
Part Number: 17420-0P261
$1006.05 MSRP: $1350.42
You Save: $344.37 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe; Exhaust Pipe; Center Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Replaces: 17420-0P260
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2015 Toyota Venza | LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Intermed Pipe, Center
Part Number: 17420-0P210
$1292.61 MSRP: $1735.05
You Save: $442.44 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe; Exhaust Pipe; Center Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2011 Toyota Venza | Base | 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Intermed Pipe, Center
Part Number: 17420-0P200
$1292.64 MSRP: $1735.10
You Save: $442.46 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe; Exhaust Pipe; Center Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2011 Toyota Venza | Base | 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Front Pipe
Part Number: 17410-25670
$768.50 MSRP: $1031.55
You Save: $263.05 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Center Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Front Pipe
Part Number: 17410-25280
$974.16 MSRP: $1307.60
You Save: $333.44 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe, Front; Catalytic Converter, Rear; Catalytic Converter; Exhaust Pipe; Center Pipe; Pipe Assembly, Exhaust, Front
- Manufacturer Note: *114=TOYOTA/PB3/Y
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)

Toyota Venza Exhaust Pipe

Choose genuine Exhaust Pipe that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Exhaust Pipe for your Toyota Venza? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Venza parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Toyota Venza Exhaust Pipe is a significant model that underlines the brand's foresight toward dependability and executing speed on the roads. Functional to expelling carbonaceous gas like carbon monoxide from the engine, Toyota Venza Exhaust Pipe secures the engine section and the passenger's cabin from being subjected to such lethal gasses hence playing a crucial role in making the automobile safer. This type of pipe is compatible with not only the first generation of Venza which was manufactured between 2008 and 2015 but also with the updated ones; this exhaust pipe I integrates easily with other elements of the exhaust system, including the muffler and the catalytic converter to enhance safe expulsion of the engine emission. The Toyota Venza has been recognized for its safety records by the IIHS and has been awarded the Top Safety Pick many times; hence, the exhaust pipe's reliability is vital to continuing this accomplishment. The Toyota Venza Exhaust Pipe design can also be slightly different, thus one can choose between central or multiple pipes to increase its functionality and productivity. Located correctly at the vehicle's position, it reduces dangers arising from accidents or corrosion that may cause vibrations or leaks within the exhaust. However, one of the noticeable parts in the Toyota Venza Exhaust Pipe in the automotive industry that denotes strength in construction and compatibility with the front-wheel drive and the all-wheel drive platforms hence guaranteeing the driver a safe and more so a comfortable drive as a result of the enhanced engineering design.

Toyota Venza Exhaust Pipe Parts and Q&A

Front Pipe
17410-0P310
Q: How to remove the exhaust pipe on Toyota Venza?
A:
Begin by putting on protective gloves while ensuring the exhaust pipe reaches safe operating temperature before attempting to remove it due to its hot surface. Start by removing the heated Oxygen Sensor from the vehicle. Use a plastic hammer to perform even tapping on the tail exhaust pipe baffle sub-assembly. The tail exhaust pipe assembly should be removed through two bolt and two spring removal followed by disconnecting it from four exhaust pipe supports before taking out the exhaust pipe gasket from the center pipe assembly. First detach the center exhaust pipe assembly by eliminating its 2 bolts at the exhaust pipe supports while taking out the 2 supports and removing its gasket from the pipe assembly. Complete the front exhaust pipe assembly removal by unfastening two bolts, two compression springs and the component while removing the gasket on the exhaust manifold converter sub-assembly.
Front Pipe
17403-0P060
Q: How to install the exhaust pipe assembly on Toyota Venza?
A:
Before installation of the exhaust pipe assembly the technician must measure compression spring length with a vernier caliper to replace the spring if it is shorter than 41.5 mm (1.64 in.). Fully insert a new gasket into the exhaust manifold converter sub-assembly while using a plastic hammer and wooden block to press it until flush with the surface. Install it with correct direction and avoid reuse and damage. Screw the front exhaust pipe assembly to 2 bolts and 2 compression springs before torquing them to 43 Nm (438 kgf-cm, 32 ft-lbf). You must apply a new gasket to the center exhaust pipe assembly followed by its connection to the 2 exhaust pipe supports then tighten 2 bolts to 43 Nm (438 kgf-cm, 32 ft-lbf). To install the tail exhaust pipe assembly check the free length of the compression springs and replace them whenever the measurement falls under 38.5 mm (1.52 in.). Irrespective of safety measures, install another gasket onto the center exhaust pipe assembly while tapping it until it becomes flush. Fasten the 2 bolts together with 2 compression springs to the 4 exhaust pipe supports while torquing them to 43 Nm (438 kgf-cm, 32 ft-lbf). Stick the concave surface of tail exhaust pipe baffle sub-assemblies to matching protuberances of the tail exhaust pipe assembly before tapping them uniformly with a plastic hammer. Install the heated Oxygen Sensor and check exhaust gas leaks as the last step of the process.

Related Toyota Venza Parts

Browse Toyota Venza Exhaust Pipe by Years

2023 2022 2021 2015 2014 2013 2012 2011 2010 2009