Other Name: Carrier Assembly, Differential; Carrier Assembly, Differential, Rear
Manufacturer Note: *FGR=43:11=3.909,W(LSD)
Position: Rear
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2002-2004 Toyota Tundra | Limited, SR5 | 8 Cyl 4.7 L GAS
| Page 1 of 2 |Next >
1-20 of 35 Results
Toyota Tundra Differential
If you're thinking about purchasing OEM parts for your Toyota Tundra, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tundra Differential at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to remove and replace the differential carrier assembly on Toyota Tundra?
A: To substitute the differential carrier assembly of 1GR-FE and 2UZ-FE, take out the rear wheel and propeller shaft assembly. Empty the differential oil, and then take off both rear Axle Shafts. Lastly, remove the rear differential carrier assembly with 10 nuts and washers and be careful not to scratch contact surfaces.
Q: How to install the rear differential carrier assembly on Toyota Tundra?
A: Installation of the rear differential carrier assembly of the 1GR-FE and 2UZ-FE requires cleaning of the surfaces, placement of a new gasket and attaching the carrier with 10 washers and nuts tightened to 72 Nm. Next, fit in the rear Axle Shafts, propeller shaft, fill the rear axle with differential oil and tighten the rear wheels respectively.