How to service the Steering Angle Sensor on Toyota Sienna?

Before servicing the Steering Angle Sensor one should first follow all Restraint Systems Service Precautions. Start the procedure by removing the negative terminal from the battery while keeping the front wheels parallel. The service begins with horn button removal then continues to steering wheel assembly disassembly and addition of lower steering column cover and spiral cable sub-assembly. Carefully turn the claw fittings to let go of the steering angle sensor from its connection to the spiral cable. Before installation the steering angle sensor needs to be mounted onto the spiral cable while keeping the front wheels in a straight direction. After centering the spiral cable install its sub-assembly along with the lower steering column cover. Putting the horn button assembly in position should be done after reinstalling the steering wheel assembly and verifying the steering wheel center point. Check the SRS warning light for correct functioning as the last step of the process.

OEM Toyota Sienna Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Steering Angle Sensors found

View related parts
Toyota Sienna Position Sensor
Part Number: 8924B-08010
$330.85 MSRP: $472.37
You Save: $141.52 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering W/Lo; Steering Wheel Position Sensor; Steering Wheel Speed Sensor; Steering Angle Sensor; Angle Sensor; Sensor, Steering
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Sienna | 25th Anniversary Edition, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sienna Sensor, Steering
Part Number: 89245-0E011
$465.79 MSRP: $682.63
You Save: $216.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: W(VSC)
- Replaces: 89245-0E010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2010 Toyota Sienna | CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Sensor Ring
Part Number: 89245-08011
$416.87 MSRP: $610.94
You Save: $194.07 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering; Steering Wheel Position Sensor; Steering Wheel Speed Sensor; Steering Angle Sensor; Steering Sensor Assembly; Sensor
- Replaces: 89245-08010, 89245-33031, 89245-33030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Sienna | CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS

Toyota Sienna Steering Angle Sensor

If you're thinking about purchasing OEM parts for your Toyota Sienna, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sienna Steering Angle Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Sienna Steering Angle Sensor Parts Questions & Experts Answers

Sensor Ring
89245-08011
Q: How to service the Steering Angle Sensor on Toyota Sienna?
A: Before servicing the Steering Angle Sensor one should first follow all Restraint Systems Service Precautions. Start the procedure by removing the negative terminal from the battery while keeping the front wheels parallel. The service begins with horn button removal then continues to Steering Wheel assembly disassembly and addition of lower steering column cover and spiral cable sub-assembly. Carefully turn the claw fittings to let go of the steering angle sensor from its connection to the spiral cable. Before installation the steering angle sensor needs to be mounted onto the spiral cable while keeping the front wheels in a straight direction. After centering the spiral cable install its sub-assembly along with the lower steering column cover. Putting the horn button assembly in position should be done after reinstalling the steering wheel assembly and verifying the steering wheel center point. Check the SRS warning light for correct functioning as the last step of the process.