How to replace the A/C Accumulator from the modulator on Toyota MR2 Spyder?

To change the A/C accumulator, insert a 10 mm hex wrench, taking out the modulator cap and filter. Remover old accumulator using pliers and insert new accumulator (vinyl bag until it is installed). Install filter again, cover modulator, grease O-rings with compressor oil and torque to 12.3 Nm.

How to replace the A/C Accumulator on Toyota MR2 Spyder?

To replace the dryer in the modulator, remove the cap and filter with a 10 mm hex wrench. Use pliers to take out the old dryer and insert a new one (keeping it in the bag until installation). Reinsert the filter, apply compressor oil to the O-rings, and tighten the cap to 12.3 N.m.

OEM Toyota MR2 Spyder A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Accumulators found

View related parts
Toyota MR2 Spyder Dehydrator
Part Number: 88474-47010
$72.83 MSRP: $102.24
You Save: $29.41 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Dryer, Cooler; A/C Receiver Drier; Drier Desiccant Element; Dryer, Air Conditioning; A/C Accumulator; Accumulator; Drier
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS
View related parts
Toyota MR2 Spyder Drier Dessicant Bag
Part Number: 88474-17010
$95.31 MSRP: $133.78
You Save: $38.47 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Dryer, Cooler; A/C Receiver Drier; Drier Desiccant Element; Dryer, Air Conditioning; A/C Accumulator; Dehydrator; Drier
- Replaces: 88474-08030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2005 Toyota MR2 Spyder | Base | 4 Cyl 1.8 L GAS

Toyota MR2 Spyder A/C Accumulator

If you're thinking about purchasing OEM parts for your Toyota MR2 Spyder, our website is your one-stop destination. We stock an extensive selection of genuine Toyota MR2 Spyder A/C Accumulator at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota MR2 Spyder A/C Accumulator Parts and Q&A

Dehydrator
88474-47010
Q: How to replace the A/C Accumulator from the modulator on Toyota MR2 Spyder?
A: To change the A/C accumulator, insert a 10 mm hex wrench, taking out the modulator cap and filter. Remover old accumulator using pliers and insert new accumulator (vinyl bag until it is installed). Install filter again, cover modulator, grease O-rings with compressor oil and torque to 12.3 Nm.
Drier Dessicant Bag
88474-17010
Q: How to replace the A/C Accumulator on Toyota MR2 Spyder?
A: To replace the dryer in the modulator, remove the cap and filter with a 10 mm hex wrench. Use pliers to take out the old dryer and insert a new one (keeping it in the bag until installation). Reinsert the filter, apply compressor oil to the O-rings, and tighten the cap to 12.3 N.m.