How to install the Crankshaft Position Sensor on Toyota Land Cruiser?

Install with the Crankshaft Position Sensor and bolt it in with a 10 Nm (102 kgf-cm, 7 ft-lbf) bolt and hook up the connector. Next, screw the sensor protector in place with two bolts, which have also a torque of 10 Nm. Finally, add the Engine Under Cover No. 2.

How to service the Crankshaft Position Sensor on Toyota Land Cruiser?

To service the Crankshaft Position Sensor, start by removing the No.2 engine under cover. Disconnect the sensor connector, then remove the bolt and the sensor. When reinstalling, apply a torque of 6.5 N. m (65 kgf. cm, 58 in. lbf). Follow the reverse order of removal for installation.

OEM Toyota Land Cruiser Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Position Sensors found

View related parts
Toyota Land Cruiser Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$102.96 MSRP: $144.53
You Save: $41.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2021, 2008-2011 Toyota Land Cruiser | Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Crankshaft Position Sensor
Part Number: 90919-05041
$143.57 MSRP: $203.25
You Save: $59.68 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 90919-05022
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1997 Toyota Land Cruiser | Base | 6 Cyl 4.5 L GAS
View related parts
Toyota Land Cruiser Sensor, Crank Position
Part Number: 90919-05071
$104.27 MSRP: $146.36
You Save: $42.09 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2021, 2008-2011 Toyota Land Cruiser | Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Sensor, Crank Position
Part Number: 90919-A5001
$125.83 MSRP: $178.13
You Save: $52.30 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05035
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2007 Toyota Land Cruiser | Base | 8 Cyl 4.7 L GAS

Toyota Land Cruiser Crankshaft Position Sensor

If you're thinking about purchasing OEM parts for your Toyota Land Cruiser, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Land Cruiser Crankshaft Position Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Land Cruiser Crankshaft Position Sensor Parts and Q&A

Camshaft Position Sensor, Driver Side
90919-T5005
Q: How to install the Crankshaft Position Sensor on Toyota Land Cruiser?
A: Install with the Crankshaft Position Sensor and bolt it in with a 10 Nm (102 kgf-cm, 7 ft-lbf) bolt and hook up the connector. Next, screw the sensor protector in place with two bolts, which have also a torque of 10 Nm. Finally, add the Engine Under Cover No. 2.
Sensor, Crank Position
90919-A5001
Q: How to service the Crankshaft Position Sensor on Toyota Land Cruiser?
A: To service the Crankshaft Position Sensor, start by removing the No.2 engine under cover. Disconnect the sensor connector, then remove the bolt and the sensor. When reinstalling, apply a torque of 6.5 N. m (65 kgf. cm, 58 in. lbf). Follow the reverse order of removal for installation.