How to service and repair the front wheel speed sensor on Toyota FJ Cruiser?

Service and repair of the front wheel speed sensor requires starting by disconnecting the negative battery cable. First remove the front wheel before securing the front speed sensor by using a 5 mm hexagon wrench to unfasten the sensor bolt. Next detach the skid control sensor wire from the front speed sensor. When handling the sensor tip always prevent foreign materials from sticking and keep debris from accessing the installation location. You must utilize the 5 mm hexagon wrench to install the front speed sensor with the bolt while using 8.3 N.m (85 kgf.cm, 73 in.lbf) torque and verify that the sensor tip remains clean during skid control sensor wire reconnection. The front wheel needs reinstall under 112 N.m (1,137 kgf.cm, 82 ft.lbf) torque while the cable must connect to the negative battery terminal with a torque of 3.9 N.m (40 kgf.cm, 35 in.lbf). Complete the check of the VSC sensor signal.

OEM Toyota FJ Cruiser Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Speed Sensors found

View related parts
Toyota FJ Cruiser Vehicle Speed Sensor
Part Number: 89413-0C011
$105.69 MSRP: $148.35
You Save: $42.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Transmission; Input Sensor; Output Sensor; Transmission Revolution Sensors (SP2, NT)
- Manufacturer Note: (L)
- Replaces: 89413-0C010, 89413-32011, 89413-32010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Sensor, Speed, Front Driver Side
Part Number: 89543-04020
$220.29 MSRP: $314.52
You Save: $94.23 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; Sensor, Speed, Rear Driver Side; ABS Wheel Speed Sensor; ABS Sensor
- Position: Front Driver Side
- Replaces: 89543-60050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser ABS Sensor, Front Passenger Side
Part Number: 89542-04020
$220.29 MSRP: $314.52
You Save: $94.23 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right, Rear Right; Speed Sensor; Front/Rear Passenger Side ABS Wheel Speed Sensor.
- Position: Front Passenger Side
- Replaces: 89542-60050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS

Toyota FJ Cruiser Speed Sensor

If you're thinking about purchasing OEM parts for your Toyota FJ Cruiser, our website is your one-stop destination. We stock an extensive selection of genuine Toyota FJ Cruiser Speed Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota FJ Cruiser Speed Sensor Parts Questions & Experts Answers

Vehicle Speed Sensor
89413-0C011
Q: How to service and repair the front wheel speed sensor on Toyota FJ Cruiser?
A: Service and repair of the front wheel speed sensor requires starting by disconnecting the negative battery cable. First remove the front wheel before securing the front speed sensor by using a 5 mm hexagon wrench to unfasten the sensor bolt. Next detach the skid control sensor wire from the front speed sensor. When handling the sensor tip always prevent foreign materials from sticking and keep debris from accessing the installation location. You must utilize the 5 mm hexagon wrench to install the front speed sensor with the bolt while using 8.3 N.m (85 kgf.cm, 73 in.lbf) torque and verify that the sensor tip remains clean during skid control sensor wire reconnection. The front wheel needs reinstall under 112 N.m (1,137 kgf.cm, 82 ft.lbf) torque while the cable must connect to the negative battery terminal with a torque of 3.9 N.m (40 kgf.cm, 35 in.lbf). Complete the check of the VSC sensor signal.