How to Properly Install a Brake Line for Rear Brake Flexible Hose on Toyota FJ Cruiser?

Start the process of installing the rear flexible hose by fastening it with a new clip. The brake tube will be connected to the flexible hose through the use of a union nut wrench to which you should apply 15 Nm torque (155 kgf-cm, 11 ft-lbf) when the wrench is not present but only 14 Nm torque (144 kgf-cm, 10 ft-lbf) when the wrench is present. Achieve the specified torque value using a torque wrench with 300 mm (11.8 in.) fulcrum length and this torque measurement should occur while the wrench is parallel to a 22 mm (0.866 in.) union nut wrench. Place the flexible hose onto the disc brake cylinder and fit it with a new gasket before torquing the union bolt up to 31 Nm (316 kgf-cm, 23 ft-lbf). The procedure for the front brake tube flexible hose includes attachment with two new clips while following specified torque measurements. During the installation you should add brake fluid to the reservoir before bleeding the brake line completely and examining the fluid level and brake fluid leak points. The procedure concludes with installing the rear wheel while torquing it to 112 Nm (1,137 kgf-cm, 82 ft-lbf).

How to remove the front Brake Line on Toyota FJ Cruiser?

The process of removing the front brake flexible hose starts by draining the brake fluid from the front wheel followed by washing off any fluid that touches painted areas immediately. Workers should remove the brake tubes by using union nut wrenches and simultaneously use a wrench to hold the flexible hose while braking fluid drains into a container. Completed front brake flexible hose removal requires disconcerting both 2 clips and the flexible hose.

OEM Toyota FJ Cruiser Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Lines found

View related parts
Toyota FJ Cruiser Flex Hose, Rear Driver Side
Part Number: 90947-02F24
$59.14 MSRP: $82.32
You Save: $23.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 90947-02D32
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2009 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Flex Hose, Front
Part Number: 90947-02F20
$49.58 MSRP: $69.01
You Save: $19.43 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front, Front Left, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front
- Replaces: 90947-02D35
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2009 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Flex Hose, Rear Driver Side
Part Number: 90947-02H01
$46.71 MSRP: $65.02
You Save: $18.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left, Rear Left Outer; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 90947-02G16
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2014 Toyota FJ Cruiser | Base | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Flex Hose, Passenger Side
Part Number: 90947-02H00
$46.71 MSRP: $65.02
You Save: $18.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Right, Rear Right Outer; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Hydraulic Hose
- Position: Passenger Side
- Replaces: 90947-02G15
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2014 Toyota FJ Cruiser | Base | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Hose, Flexible(For Rear Driver Side)
Part Number: 90947-02H18
$48.98 MSRP: $68.18
You Save: $19.20 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014 Toyota FJ Cruiser | Base | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Hose, Flexible(For Rear Passenger Side)
Part Number: 90947-02H17
$48.98 MSRP: $68.18
You Save: $19.20 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014 Toyota FJ Cruiser | Base | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Flex Hose, Front
Part Number: 90947-02G20
$42.29 MSRP: $58.86
You Save: $16.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2014 Toyota FJ Cruiser | Base | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Flex Hose, Passenger Side
Part Number: 90947-02F23
$59.14 MSRP: $82.32
You Save: $23.18 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Hydraulic Hose
- Position: Passenger Side
- Replaces: 90947-02D31
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2009 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS

Toyota FJ Cruiser Brake Line

Choose genuine Brake Line that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Brake Line for your Toyota FJ Cruiser? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota FJ Cruiser parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota FJ Cruiser Brake Line is another important item that speaks volumes of the braking system in Toyota FJ Cruiser. Intended to connect between the master cylinder as the source of brake fluid and the brake caliper pistons as the consumers for such, the Brake Line guarantees the functionality of the hydraulic braking system to deliver adequate, if not reliable, stopping power during operation. Different FJ Cruiser through the years have put up with different brake line setups, a metal and rubber one to be specific. However, with the improved materials like corrosion resistant stainless steel the Brake Line has greatly benefited from this and has become a unique selling point in the automobile markets. This is especially true with FJ Cruiser owners hence the need for efficiency blended with safety when on the road. The market offers several versions of the Toyota FJ Cruiser Brake Line in one design, so the drivers of many models of the car can continuously have effective brake control. Also, the use of braided stainless steel Brake Lines can help in enhancing the performance and may increase the responsiveness of pedal which again adds to the spirited feel of a car. This made the Toyota FJ Cruiser Brake Line a significant part of the vehicle's safety feature while at the same time putting into practice the FJ Cruiser strong construction and performance off-road vehicle mantra. Altogether, the brake line is an essential component that impacts the working performance and safety of the Toyota FJ Cruiser that is why it can be considered crucial for the owners.

Toyota FJ Cruiser Brake Line Parts and Q&A

Flex Hose, Rear Driver Side
90947-02F24
Q: How to Properly Install a Brake Line for Rear Brake Flexible Hose on Toyota FJ Cruiser?
A:
Start the process of installing the rear flexible hose by fastening it with a new clip. The brake tube will be connected to the flexible hose through the use of a union nut wrench to which you should apply 15 Nm torque (155 kgf-cm, 11 ft-lbf) when the wrench is not present but only 14 Nm torque (144 kgf-cm, 10 ft-lbf) when the wrench is present. Achieve the specified torque value using a torque wrench with 300 mm (11.8 in.) fulcrum length and this torque measurement should occur while the wrench is parallel to a 22 mm (0.866 in.) union nut wrench. Place the flexible hose onto the disc brake cylinder and fit it with a new gasket before torquing the union bolt up to 31 Nm (316 kgf-cm, 23 ft-lbf). The procedure for the front brake tube flexible hose includes attachment with two new clips while following specified torque measurements. During the installation you should add brake fluid to the reservoir before bleeding the brake line completely and examining the fluid level and brake fluid leak points. The procedure concludes with installing the rear wheel while torquing it to 112 Nm (1,137 kgf-cm, 82 ft-lbf).
Flex Hose, Front
90947-02F20
Q: How to remove the front Brake Line on Toyota FJ Cruiser?
A:
The process of removing the front brake flexible hose starts by draining the brake fluid from the front wheel followed by washing off any fluid that touches painted areas immediately. Workers should remove the brake tubes by using union nut wrenches and simultaneously use a wrench to hold the flexible hose while braking fluid drains into a container. Completed front brake flexible hose removal requires disconcerting both 2 clips and the flexible hose.

Related Toyota FJ Cruiser Parts

Browse Toyota FJ Cruiser Brake Line by Years

2014 2013 2012 2011 2010 2009 2008 2007