The first task begins with jacking up the vehicle before proceeding to remove a cool catalytic converter. You should remove the 2
Exhaust Pipe bolts and exhaust pipe stay while torquing them to 33 N.m (330 kgf.cm, 24 ft.lbf). The next step involves taking off 2 center exhaust pipe bolts that are attached to the tailpipe while torquing them to 19 N.m (190 kgf.cm, 14 ft.lbf). Proceed by removing the bolt combined with clamp that maintains the front exhaust pipe connection to the center pipe while torquing it to 32 N.m (320 kgf.cm, 24 ft.lbf). The next step requires removing the center exhaust pipe accompanied by its 2 gaskets while you will need to replace the gaskets during the reassembly stage. The converter installation follows the opposite sequence of its removal process.