Toyota 17410-0D010
Front Pipe

The first task begins with jacking up the vehicle before proceeding to remove a cool catalytic converter. You should remove the 2 exhaust pipe bolts and exhaust pipe stay while torquing them to 33 N.m (330 kgf.cm, 24 ft.lbf). The next step involves taking off 2 center exhaust pipe bolts that are attached to the tailpipe while torquing them to 19 N.m (190 kgf.cm, 14 ft.lbf). Proceed by removing the bolt combined with clamp that maintains the front exhaust pipe connection to the center pipe while torquing it to 32 N.m (320 kgf.cm, 24 ft.lbf). The next step requires removing the center exhaust pipe accompanied by its 2 gaskets while you will need to replace the gaskets during the reassembly stage. The converter installation follows the opposite sequence of its removal process.

The first step for catalytic converter replacement involves using a jack to lift the vehicle while waiting for the converter to cool down. Unscrew and remove the 2 bolts which secure the exhaust pipe stay while torquing them to 33 Nm (330 kg.cm, 24 ft.lb). The next step requires unscrewing of 2 center exhaust pipe bolts from the tailpipe using 19 Nm (190 kg.cm at 14ft.lb torque. You need to remove the front exhaust pipe bolt and clamp which attaches to the center pipe while torquing them to 32 Nm (320 kg.cm, 24 ft.lb). When replacing the center exhaust pipe extract the two associated gaskets because you will need to install new gaskets before reassembly. Reinstall the converter according to the removal reversal steps.