Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2012-2017 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, Special Edition, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2021-2022 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Switch Assembly, Stop Lamp; Brake Light Switch
Manufacturer Note: PRE-COLLISION SYSTEM-WITH
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2018-2020 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Switch Assembly, Stop Lamp; Brake Light Switch
Manufacturer Note: W/*CRC
Replaces: 84340-20020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1984 Toyota Camry | DLX, LE | 4 Cyl 1.8 L DIESEL, 4 Cyl 2.0 L GAS
Toyota Camry Brake Light Switch
If you're thinking about purchasing OEM parts for your Toyota Camry, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Camry Brake Light Switch at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to service and repair the brake light switch on Toyota Camry?
A: In order to service the brake light switch, it is necessary to remove the front door scuff plate LH, cowl side trim sub-assembly LH and lower instrument panel finish panel LH. Next, remove the sub-assembly of instrument panel No.1, instrument panel finish panel No.1, instrument cluster finish panel No.1, combination meter assembly and stop light switch assembly.
Q: How to install the brake light switch on Toyota Camry?
A: In order to fit the brake light switch, push the assembly until the cushion is contacted and hold the pedal. Rotate clockwise until it is tightened by 1.5 Nm torque. Install the switch, verify the protrusion of the rod and attach the combination meter and other instrument panel items.