Other Name: Switch, Courtesy Lamp; Door Jamb Switch, Rear; Courtesy Light, Rear; Interior Lights; Jamb Switch; Courtesy Lamp Switch Assembly for Front and Rear Doors.
Position: Rear
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1997-2001 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
Other Name: Switch, Courtesy Lamp; Door Jamb Switch, Front, Rear; Switch Assembly, Courtesy Lamp (For Front, Rear, Back Door)
Manufacturer Note: TYPE B:REFER ILLUST.
Replaces: 84231-0D030, 84231-46020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2018-2019, 2002-2011 Toyota Camry | Base, CE, Hybrid, L, LE, SE, XLE, XSE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Other Name: Switch, Courtesy Lamp; Door Jamb Switch, Front, Rear; Door Ajar Switch; Courtesy Lamp Switch Assembly for Front, Rear, and Slide Doors.
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1999-2022 Toyota Camry | Base, CE, Hybrid, Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, L, LE, SE, SE Nightshade, Special Edition, TRD, XLE, XSE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1984-1986 Toyota Camry | DLX, LE | 4 Cyl 1.8 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
Toyota Camry Door Jamb Switch
If you're thinking about purchasing OEM parts for your Toyota Camry, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Camry Door Jamb Switch at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to service the rear Door Jamb Switch on Toyota Camry?
A: In order to service the rear door courtesy switch, the bolt needs removal with the application of T30 TORX socket wrench to disassemble the assembly and connect the connector. To install, loosen the connector again and clamp the assembly with the bolt using a torque of 12 N. m (122 kgf. cm, 8.9 ft. lbf).
Q: How to service the front Door Jamb Switch on Toyota Camry?
A: To service the front door courtesy switch, remove the assembly using a T30 TORX socket wrench to take out the bolt and disconnect the connector. For installation, reconnect the connector and use the T30 wrench to secure the assembly with a torque of 12 N.m (122 kgf.cm, 8.9 ft.lbf).