How to service and repair the power steering pump on Toyota 4Runner?

Service technicians must start power steering pump maintenance by removing the drive belt after loosening both the power steering idle pulley set bolt and belt adjusting bolt. Use a spanner (24 mm) to secure the pressure port union during its removal process involving the joint bolt and gasket for the tube. Terminating the return hose operation requires the removal of its clip as well as proper attention to avoid drive belt fluid contact. The PS vane pump assembly can be removed after unbolting the 2 retaining bolts. The PS vane pump assembly installation requires two bolts which should be tightened to 39 Nm (400kgf.cm, 29 ft. lbs.). Secure the return hose by installing its clip. Install a new gasket followed by the union bolt for the pressure feed tube then attach it while ensuring the stopper contacts the PS pump body before torquing the union bolt to 47 Nm (475 kgf.cm, 34 ft. lbs.). Place the drive belt while adjusting its tension with the belt adjusting bolt until torque reaches 39 Nm (400 kgf.cm, 29 ft.lbs.). Then torque the power steering idle pulley set nut at 39 Nm (400 kgf.cm, 29 ft.lbs.) and continue with power steering bleeding.

OEM Toyota 4Runner Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Power Steering Pumps found

View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44320-35490
$337.26 MSRP: $481.52
You Save: $144.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2002 Toyota 4Runner | Base, Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44310-35660
$339.82 MSRP: $485.19
You Save: $145.37 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane; Pump
- Replaces: 44310-35650
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44310-60563
$307.90 MSRP: $439.61
You Save: $131.71 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane
- Replaces: 44310-60560, 44310-60561, 44310-60562
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010 Toyota 4Runner | SR5 | 4 Cyl 2.7 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44310-60542
$292.64 MSRP: $417.82
You Save: $125.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane
- Replaces: 44310-60540, 44310-60541
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44320-35480
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2000 Toyota 4Runner | Base | 4 Cyl 2.7 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44320-35430
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1995 Toyota 4Runner | SR5 | 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44320-35241
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane
- Replaces: 44320-35240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1989-1995 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44320-35610
$287.16 MSRP: $410.00
You Save: $122.84 (30%)
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane; Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44320-35411
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane
- Replaces: 44320-35410
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991 Toyota 4Runner | SR5 | 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44320-35401
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane
- Replaces: 44320-35400
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1989-1991 Toyota 4Runner | DLX, SR5 | 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44320-35370
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane
- Manufacturer Note: COLD SPEC
- Replaces: 44320-35350, 44320-35351, 44320-35270
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990 Toyota 4Runner | SR5 | 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44320-35361
Product Specifications
- Other Name: Pump Assembly, L/Pulley
- Replaces: 44320-35220, 44320-35222, 44320-35221
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1988-1989 Toyota 4Runner | DLX, SR5 | 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44320-35140
Product Specifications
- Other Name: Pump Assembly, Vane L/Pu; Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1990 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44320-35120
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1988 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Power Steering Pump
Part Number: 44320-35022
Product Specifications
- Other Name: Pump Assembly, Vane L/Pu; Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1987 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS

Toyota 4Runner Power Steering Pump

If you're thinking about purchasing OEM parts for your Toyota 4Runner, our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner Power Steering Pump at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota 4Runner Power Steering Pump Parts Questions & Experts Answers

Power Steering Pump
44320-35490
Q: How to service and repair the power steering pump on Toyota 4Runner?
A: Service technicians must start power steering pump maintenance by removing the Drive Belt after loosening both the power steering idle pulley set bolt and belt adjusting bolt. Use a spanner (24 mm) to secure the pressure port union during its removal process involving the joint bolt and gasket for the tube. Terminating the return hose operation requires the removal of its clip as well as proper attention to avoid drive belt fluid contact. The PS vane pump assembly can be removed after unbolting the 2 retaining bolts. The PS vane pump assembly installation requires two bolts which should be tightened to 39 Nm (400kgf.cm, 29 ft. lbs.). Secure the return hose by installing its clip. Install a new gasket followed by the union bolt for the pressure feed tube then attach it while ensuring the stopper contacts the PS pump body before torquing the union bolt to 47 Nm (475 kgf.cm, 34 ft. lbs.). Place the drive belt while adjusting its tension with the belt adjusting bolt until torque reaches 39 Nm (400 kgf.cm, 29 ft.lbs.). Then torque the power steering idle pulley set nut at 39 Nm (400 kgf.cm, 29 ft.lbs.) and continue with power steering bleeding.