How to service and repair the Clutch Slave Cylinder on Toyota 4Runner?

Service and repair of the Clutch Slave Cylinder begins by using Special Service Tool: 09023-00100 to disconnect the clutch line while storing collected fluid in a container and tightening to 15 Nm (155 kgf-cm, 11 ft. lbs.). Start by removing the two release cylinder securing bolts at a torque point of 13 Nm (130 kgf-cm, 9 ft. lbs.) before pulling out the release cylinder. The disassembly process requires extraction of the boot with push rod followed by use of compressed air to pull out the piston together with spring from the cylinder. A layer of lithium soap base glycol grease should cover the immersed piston before installing it with its spring inside the cylinder while the push rod mounted boot goes back onto the cylinder. An essential last step includes bleeding the clutch system after completing installation which follows the reverse sequence of uninstallation.

OEM Toyota 4Runner Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Clutch Slave Cylinders found

View related parts
Toyota 4Runner Slave Cylinder
Part Number: 31470-43010
$66.82 MSRP: $93.80
You Save: $26.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder
- Replaces: 31470-35130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2000 Toyota 4Runner | Base | 4 Cyl 2.7 L GAS
View related parts
Toyota 4Runner Slave Cylinder
Part Number: 31470-35120
$82.65 MSRP: $116.02
You Save: $33.37 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder; Cylinder Assembly, Clutch Release
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2000 Toyota 4Runner | Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Slave Cylinder
Part Number: 31470-35100
$82.19 MSRP: $115.38
You Save: $33.19 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder; Cylinder Assembly, Clutch Release
- Replaces: 31470-35070, 31470-35071
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1995 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Slave Cylinder
Part Number: 31470-30260
$82.65 MSRP: $116.02
You Save: $33.37 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder; Cylinder Assembly, Clutch Release
- Replaces: 31470-35050, 31470-22150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1995 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

Toyota 4Runner Clutch Slave Cylinder

If you're thinking about purchasing OEM parts for your Toyota 4Runner, our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner Clutch Slave Cylinder at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota 4Runner Clutch Slave Cylinder Parts Questions & Experts Answers

Slave Cylinder
31470-35120
Q: How to service and repair the Clutch Slave Cylinder on Toyota 4Runner?
A: Service and repair of the Clutch Slave Cylinder begins by using Special Service Tool: 09023-00100 to disconnect the clutch line while storing collected fluid in a container and tightening to 15 Nm (155 kgf-cm, 11 ft. lbs.). Start by removing the two release cylinder securing bolts at a torque point of 13 Nm (130 kgf-cm, 9 ft. lbs.) before pulling out the release cylinder. The disassembly process requires extraction of the boot with push rod followed by use of compressed air to pull out the piston together with spring from the cylinder. A layer of lithium soap base glycol grease should cover the immersed piston before installing it with its spring inside the cylinder while the push rod mounted boot goes back onto the cylinder. An essential last step includes bleeding the clutch system after completing installation which follows the reverse sequence of uninstallation.