How to replace the oil filter sub-assembly safely and correctly on Scion xB?

Engine oil exposure must be prevented when replacing the oil filter sub-assembly because prolonged contact leads to skin irritation and dermatitis and includes dangerous material contaminants. Wear protective clothing with gloves so you can wash your skin thoroughly either with soap and water or use waterless hand cleaner to remove any used engine oil while abstaining from using gasoline or thinners or solvents. The proper location to discard oil filters and.used oil products exists at specific disposal sites. First drain all engine oil before extracting the oil filter sub-assembly with Special Service Tool: 09228-06501. Before installation, inspect and clean the mounting area while applying fresh engine oil to the gasket inside a new oil filter before starting mounting and continuing to tighten it until the gasket meets the seat. Complete the filter installation using Special Service Tool: 09228-06501 by adding 3/4 more turns of torque. Replace the oil drain plug and use a new gasket before torquing the plug to 38 Nm (382 kgf-cm, 28 ft. lbs.). The oil fill should contain 3.7 liters (3.9 US qts, 3.3 Imp. qts) when using a new filter but only 3.4 liters (3.6 US qts, 3.0 Imp. qts) without replacement or 4.1 liters (4.3 US qts, 3.6 Imp. qts) as a dry fill capacity. The last step should involve a leak inspection of the engine oil.

OEM Scion xB Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Filters found

View related parts
Scion xB Oil Filter Part Number: 90915-YZZN1
$4.70 MSRP: $6.57
You Save: $1.87 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Oil; Engine Oil Filter; Filter Change Maintenance Kit; Filter Element
- Replaces: 15601-13011, 15600-13051, 90080-91058, 90915-YZZF2, 90915-YZZM1, 90080-91034, 90915-10009, 08922-02005, 15600-16020, 15600-16021, 15601-13010, 90915-10001, 90915-10003, 90915-TA001, 15601-01010, 90915-03001, 90915-YZZA2
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Scion xB | Base | 4 Cyl 1.5 L GAS
View related parts
Scion xB Oil Filter Part Number: 90915-YZZF1
$4.70 MSRP: $6.57
You Save: $1.87 (29%)
ADD TO CART
Product Specifications
- Other Name: Filter, Oil; Engine Oil Filter; Filter Change Maintenance Kit
- Replaces: 08922-02001, 08922-02002, 90080-91210, 90915-10004, 90915-CA001, 90915-YZZA1, 90915-03004, 90915-10002, 90915-TA002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2015 Scion xB | Base | 4 Cyl 2.4 L GAS

Scion xB Oil Filter

Choose genuine Oil Filter that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Oil Filter for your Scion xB? Our website is your one-stop destination. We stock an extensive selection of genuine Scion xB parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Scion xB Oil Filter being an essential piece of the Scion xB means that it plays a critical functionary role in the longevity of the car's engine. Stable and highly appraised by car enthusiasts, this oil filter correspondingly serves the purpose of preserving the engine health through a clean oil and free from contaminants. The Scion xB Oil Filter can make use of the filter media which is cellulose, synthetic, or even a blend; it has a filtration efficiency that can go up to 99% thus it helps in trapping the dirt particles without affecting the flow of the oil. Specially designed for the Scion xB, this oil filter fits different models of this car Importantly, it can be installed in the car that comes with 1.5L 1NZ-FE and 2.4L 2AZ-FE engines and, thus, contributes to the improvement of its efficiency and safety. The structural form of the Scion xB Oil Filter is strong especially in its spin on version that can handle on oil pressure as well as raw vibrations coming from the engines. Also, it provides an anti-drain back valve and the bypass valve to facilitate the contradictory oil flow at the start up and filter clogging. This meticulous care does not only has the advantage of improving the Scion xB performance as a car but also feature that leads to the aspects of safer road use. In terms of durability and Filtration capacity in the Scion xB automobiles market, then the Scion xB Oil Filter remains a stout contender and a necessity to retain the health of your Scion xB automobiles' engine.

Scion xB Oil Filter Parts and Q&A

Oil Filter
90915-YZZN1
Q: How to replace the oil filter sub-assembly safely and correctly on Scion xB?
A:
Engine oil exposure must be prevented when replacing the oil filter sub-assembly because prolonged contact leads to skin irritation and dermatitis and includes dangerous material contaminants. Wear protective clothing with gloves so you can wash your skin thoroughly either with soap and water or use waterless hand cleaner to remove any used engine oil while abstaining from using gasoline or thinners or solvents. The proper location to discard oil filters and.used oil products exists at specific disposal sites. First drain all engine oil before extracting the oil filter sub-assembly with Special Service Tool: 09228-06501. Before installation, inspect and clean the mounting area while applying fresh engine oil to the gasket inside a new oil filter before starting mounting and continuing to tighten it until the gasket meets the seat. Complete the filter installation using Special Service Tool: 09228-06501 by adding 3/4 more turns of torque. Replace the oil drain plug and use a new gasket before torquing the plug to 38 Nm (382 kgf-cm, 28 ft. lbs.). The oil fill should contain 3.7 liters (3.9 US qts, 3.3 Imp. qts) when using a new filter but only 3.4 liters (3.6 US qts, 3.0 Imp. qts) without replacement or 4.1 liters (4.3 US qts, 3.6 Imp. qts) as a dry fill capacity. The last step should involve a leak inspection of the engine oil.