×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM Scion tC Fuel Pressure Regulator
Fuel Tank Pressure Regulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Fuel Pressure Regulators found
Scion tC Fuel Pressure Regulator
Part Number: 23280-21010$80.49 MSRP: $112.98You Save: $32.49 (29%)Ships in 1 Business Day
Scion tC Damper
Part Number: 23270-36031$103.78 MSRP: $145.67You Save: $41.89 (29%)Ships in 1-2 Business Days
Scion tC Damper
Part Number: 23270-28021$177.49 MSRP: $253.42You Save: $75.93 (30%)Ships in 1-3 Business Days
Scion tC Regulator Assembly, Fuel Pressure
Part Number: 23280-20060$80.49 MSRP: $112.98You Save: $32.49 (29%)Ships in 1-3 Business Days
Scion tC Fuel Pressure Regulator
If you're thinking about purchasing OEM parts for your Scion tC, our website is your one-stop destination. We stock an extensive selection of genuine Scion tC Fuel Pressure Regulator at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Scion tC Fuel Pressure Regulator Parts Questions & Experts Answers
- Q: How to remove and replace the fuel pressure regulator on Scion tC?A: The fuel pressure regulator replacement process starts with removing the rear seat cushion assembly then continuing to the following steps. Before moving on you should eliminate the rear floor service hole cover after detaching both the butyl tape and the Fuel Pump connector. The fuel system pressure needs to be released through engine start with immediate switch-off during engine stoppage then engine cranking until start-up becomes impossible. Thoroughly drain fuel tank pressure by taking out the fuel tank cap followed by disconnecting the wire from the wire connector. Separate the negative wire cable from the battery terminal port. Keep the fuel suction with pump and gauge tube assembly free by disconnecting the fuel tank main tube then take off the tube joint clip before pulling the fuel tube joint out from the fuel suction plate without using any tools while protecting the disconnected parts with plastic bags covered in tape. Begin by taking out the fuel suction with pump and gauge tube from the fuel tank by first removing the 2 bolts and the fuel tank protector plate and then removing the 6 bolts and the fuel tank vent tube set plate while paying close attention to avoid damage to the fuel pump filter and fuel sender gauge arm. Separate the gasket which is located on the fuel suction tube with pump and gauge tube.
