Other Name: Motor Assembly, Power Window Regulator; Motor, Center Left, Front Left, Rear Left, Rear Right; Door Lock Actuator; Motor; Power Window Regulator Assembly for Front Driver, Passenger, and Driver Side.
Replaces: 85720-35140
Item Weight: 1.30 Pounds
Item Dimensions: 7.4 x 4.6 x 4.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85720-AE010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Motor Assembly, Power Window Regulator; Center Right, Front Right, Rear Left, Rear Right, Right; Motor; Power Window Regulator Assembly for Front Passenger, Driver, and Passenger Side.
Replaces: 85710-35180
Item Weight: 1.30 Pounds
Item Dimensions: 7.7 x 4.7 x 4.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85710-AE010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2010 Toyota Yaris Submodels:
Base, L, LE, S, SE | 4 Cyl 1.5 L GAS
2010 Toyota Yaris Window Motor
Looking for affordable OEM 2010 Toyota Yaris Window Motor? Explore our comprehensive catalogue of genuine 2010 Toyota Yaris Window Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2010 Toyota Yaris Window Motor Parts Q&A
Q: How to install the Window Motor assembly for the hatchback front side on 2010 Toyota Yaris?
A: A proper installation of the hatchback front side power window regulator motor assembly starts by applying MP grease to all sliding and rotating components of the regulator motor. A "Torx" socket wrench T25 should be used to install the power window regulator motor assembly front through its 3 screws while maintaining a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf). You must mount the front door window regulator sub-assembly before placing the front door glass sub-assembly. The installation order begins with the front door service hole cover and continues with the front door belt molding and outer rear view mirror assembly. The installation of front door window moldings begins with the rear frame for the 3-door variant followed by the corresponding front frame. The next sequence of installation consists of the front door trim board sub-assembly together with the front armrest base panel upper and the door armrest cover. As the last step thread the cable to the negative battery terminal and tighten it to 5.4 Nm (55 kgf-cm, 48 in-lbf).