OEM 2010 Toyota Yaris Alternator

2010 Toyota Yaris Alternator Parts Q&A

• Q: How to install the alternator assembly on 2010 Toyota Yaris?

  A: The first step of assembling the generator requires using fixing bolt B for temporary attachment. Begin by installing fixing bolts A and B to the fan belt adjusting slider and move the generator toward the cylinder block before tightening bolt B to 11 Nm (112 kgf-cm. 8.1 ft-lbf). After installing the wire harness clamp and connector the technician should attach terminal B with its nut and tighten it to 9.8 Nm (100 kgf-cm, 7.2 ft-lbf) before installing the terminal cap. Lastly install the fan and generator V belt while conducting necessary adjustments to the fan and generator V belt, then perform a comprehensive check on both components. After installing the engine under cover RH users must connect the cable to the negative battery terminal and tighten it with a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf).