Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 Scion xD Oil Pressure Switch

Oil Pressure Sender Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

  • 2010 Scion xD Oil Pressure Switch - 83530-0E010
    2010 Scion xD Oil Pressure Switch Diagram - 83530-0E010
    View related parts

    2010 Scion xD Oil Pressure Sensor

    Part Number: 83530-0E010
    $46.39 MSRP: $64.57
    You Save: $18.18 (29%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Switch Assembly, Oil Pressure; Engine Oil Pressure Switch; Oil Pres Gauge Switch; Pressure Switch; Oil Pressure Sending Unit; Switch; Switch Assembly, Oil Pressure (For Engine); Oil Pressure Switch
    • Replaces: 83530-28020, 83530-AA011, 83530-AA010
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 2.4 x 1.8 x 1.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 83530-0E010
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2010 Scion xD Submodels:
    • Base | 4 Cyl 1.8 L GAS

2010 Scion xD Oil Pressure Switch

Looking for affordable OEM 2010 Scion xD Oil Pressure Switch? Explore our comprehensive catalogue of genuine 2010 Scion xD Oil Pressure Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion xD Parts Questions & Experts Answers

  • Q: How to install the engine oil pressure switch assembly on 2010 Scion xD?
    A: The 2ZR-FE lubrication system engine oil pressure switch assembly installation begins by applying Toyota Genuine Adhesive 1344, Three Bond 1344, or equivalent to 2 or 3 threads of the oil pressure switch. Start by applying Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent to 2 or 3 threads of the oil pressure switch. Next, bolt the switch in place with a 24 mm deep socket wrench set to 15 Nm (153 kgf-cm, 11 ft-lbf). Waiting for at least one full hour without starting the engine is necessary after the installation steps. After installing the oil pressure switch you must attach its connector before checking the area for oil leakage. The right front wheel must be replaced after tightening to 103 Nm (1050 kgf-cm, 76 ft-lbf).

Related 2010 Scion xD Parts

Alternate Year Models

+
2009 Scion xD Oil Pressure Switch 2011 Scion xD Oil Pressure Switch