OEM 2010 Scion xD Drive Belt

2010 Scion xD Parts Questions & Experts Answers

• Q: How to install the fan and generator Drive Belt on 2010 Scion xD?

  A: The V belt for the fan and generator needs provisional placement onto each pulley to verify proper insertion in the rib groove. After that, apply tension to the belt while adjusting bolt C then tighten bolt D to 19 N m (189 kgf cm, 14 ft. lbf). Tighten the V belt tension through the adjustment of bolt C while tightening bolt D to 19 N m torque (189 kgf cm, 14 ft. lbf). After installing the V belt over the pulleys, tighten fixing bolts A and B to 19 Nm (189 kgf-cm, 14 ft-lbf for bolt A) while bolt B requires 43 Nm (438 kgf-cm, 32 ft-lbf). The V belt deflection and tension inspection requires a tensile force of 98 N (10 kgf) to be applied throughout the assessment. When you put on a new belt operate the engine for five minutes before refitting the belt according to manufacturer specifications. Execute a V-ribbed belt deflection and tension inspection at the specific point after engine rotation reaches the second revolution while the engine is at TDC during cold conditions. When installing a belt that operated for more than five minutes adjust the deflection and tension to the used belt specification values. The first step when using a belt tension gauge is to check its accuracy with a master gauge before moving on to using a sonic tension meter and entering Weight: 15 g/rib m, Width: 6 ribs, Span: 188 mm (with A/C) or 282 mm (without A/C). Install both the right-hand engine under cover and the number two cylinder head cover.