OEM 2010 Scion xD Clutch Slave Cylinder

2010 Scion xD Clutch Slave Cylinder Parts Questions & Experts Answers

• Q: How to install the Clutch Slave Cylinder assembly on 2010 Scion xD?

  A: Fasten the clutch release cylinder assembly using torque tool on its two bolts to a value of 12 Nm (120 kgf-cm, 9 ft-lbf). The next step involves installation of the clutch release cylinder to the flexible hose tube by using a union nut wrench which requires torque of 15 Nm (155 kgf-cm, 11 ft-lbf) if a wrench is omitted or torque of 14 Nm (144 kgf-cm, 10 ft-lbf) if the wrench is expected. Installing a combination of the torque wrench at 300 mm (11.8 in.) and the union nut wrench at 22 mm (0.866 in.), maintain their parallel position for proper torque value measurement. The brake liquid fill-up process should begin after the connections while performing clutch bleeding under specific torque requirements of 8.3 Nm (85 kgf-cm, 73 in-lbf). To complete the procedure inspectors should examine the vehicle for clutch fluid leakage.