OEM 2010 Scion xD Clutch Master Cylinder

2010 Scion xD Clutch Master Cylinder Parts Questions & Experts Answers

• Q: How to install the Clutch Master Cylinder on 2010 Scion xD?

  A: Install the Clutch Master Cylinder by first securing the push rod lock nut then adding the push rod clevis before tightening the lock nut and making sure dimension A aligns with the measured value. The clutch master cylinder needs to be installed with two nuts which should be tightened to reach 9.0 Nm (92 kgf-cm, 80 in-lbf). For installing the clutch master cylinder to the flexible hose tube you should use a union nut wrench to achieve a torque of 14 Nm (144 kgf-cm, 10 ft-lbf) or reach 15 Nm (155 kgf-cm, 11 ft-lbf) without the wrench. You can reach the specified torque with a 300 mm (11.8 in.) torque wrench and a 22 mm (0.866 in.) union nut wrench where the wrench must remain parallel to the torque wrench. The clutch reservoir tube should be attached to the clutch master cylinder assembly through the use of a clip. Follow the step by mounting the brake booster unit into position. Adjustment of the clutch pedal sub-assembly should precede assembly of the instrument panel under tray and the No. 1 instrument panel under cover sub-assembly.