How to install the Brake Light Switch on 2010 Scion xD?

First set the stop light switch into the adjuster until it reaches the brake pedal while the brake pedal remains at rest. Proceed by turning the switch a quarter turn clockwise when locking it into position while keeping the brake pedal from coming down. The setup requires 1.5 Nm of torque force (15 kgf-cm or 13 in-lb as lower values work). You should examine the stop light switch clearance following installation to range between 0.5 to 2.6 mm (0.020 to 0.102 in.). Follow the last step by attaching the stop light switch connector to its switch. Install the instrument panel under cover sub-assembly LH after concluding these installation steps.

OEM 2010 Scion xD Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2010 Scion xD Stoplamp Switch
Part Number: 84340-09310
$16.73 MSRP: $23.29
You Save: $6.56 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Stop Lamp; Brake Light Switch; Stoplight Switch
- Replaces: 84340-09040, 84340-09070, 84340-79015, 84340-09041, 84340-19026, 84340-19025
- Part Name Code: 84340
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84340-09310
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xD Submodels:
- Base | 4 Cyl 1.8 L GAS

2010 Scion xD Brake Light Switch

Looking for affordable OEM 2010 Scion xD Brake Light Switch? Explore our comprehensive catalogue of genuine 2010 Scion xD Brake Light Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion xD Parts Questions & Experts Answers

Q: How to install the Brake Light Switch on 2010 Scion xD?
A: First set the stop light switch into the adjuster until it reaches the brake pedal while the brake pedal remains at rest. Proceed by turning the switch a quarter turn clockwise when locking it into position while keeping the brake pedal from coming down. The setup requires 1.5 Nm of torque force (15 kgf-cm or 13 in-lb as lower values work). You should examine the stop light switch clearance following installation to range between 0.5 to 2.6 mm (0.020 to 0.102 in.). Follow the last step by attaching the stop light switch connector to its switch. Install the instrument panel under cover sub-assembly LH after concluding these installation steps.