How to install the wiper switch and complete the steering assembly on 2010 Scion xB?

First attach the claw to install the windshield wiper switch and afterward join the two connectors. Afterward you should install the steering column cover before adjusting the spiral cable then finally installing the steering wheel assembly. Attaching the steering pad requires you to follow up with an electrical connection of the cable to the negative battery terminal where you must achieve 5.4 Nm (55 kgf-cm, 48 in-lbf) torque. You should complete the inspection of SRS warning light functionality during the final step of installation.

OEM 2010 Scion xB Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Switch found

View related parts
2010 Scion xB Wiper Switch
Part Number: 84652-52201
$163.08 MSRP: $230.86
You Save: $67.78 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Windshield Wiper; Windshield Wiper Switch; Windshield Washer Switch; Switch Assembly, Windshield Wiper (W/Relay, Wiper Control)
- Manufacturer Note: CANADA SPEC
- Replaces: 84652-52200
- Part Name Code: 84650D
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.5 x 5.1 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84652-52201
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2010 Scion xB Wiper Switch

Looking for affordable OEM 2010 Scion xB Wiper Switch? Explore our comprehensive catalogue of genuine 2010 Scion xB Wiper Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion xB Wiper Switch Parts Q&A

Q: How to install the wiper switch and complete the steering assembly on 2010 Scion xB?
A: First attach the claw to install the windshield wiper switch and afterward join the two connectors. Afterward you should install the steering column cover before adjusting the spiral cable then finally installing the steering wheel assembly. Attaching the steering pad requires you to follow up with an electrical connection of the cable to the negative battery terminal where you must achieve 5.4 Nm (55 kgf-cm, 48 in-lbf) torque. You should complete the inspection of SRS warning light functionality during the final step of installation.

Related 2010 Scion xB Parts

Alternate Year Models

2009 Scion xB Wiper Switch 2011 Scion xB Wiper Switch