How to install the wiper switch and ensure proper functionality of the SRS warning light on 2009 Scion xB?

Start by inserting the claw then put in the windshield wiper switch followed by joining the two connectors. After the steers column cover you must adjust the spiral cable then put in the steering wheel assembly. You need to attach the steering pad afterward while hooking up the cable to the negative battery terminal with a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf). Check the SRS warning light for correct operation in the last step.

OEM 2009 Scion xB Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Switch found

View related parts
2009 Scion xB Wiper Switch
Part Number: 84652-52201
$148.16 MSRP: $209.73
You Save: $61.57 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Windshield Wiper; Windshield Wiper Switch; Windshield Washer Switch; Switch Assembly, Windshield Wiper (W/Relay, Wiper Control)
- Manufacturer Note: CANADA SPEC
- Replaces: 84652-52200
- Part Name Code: 84650D
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.5 x 5.1 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84652-52201
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2009 Scion xB Wiper Switch

Looking for affordable OEM 2009 Scion xB Wiper Switch? Explore our comprehensive catalogue of genuine 2009 Scion xB Wiper Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Scion xB Parts Questions & Experts Answers

Q: How to install the wiper switch and ensure proper functionality of the SRS warning light on 2009 Scion xB?
A: Start by inserting the claw then put in the windshield wiper switch followed by joining the two connectors. After the steers column cover you must adjust the spiral cable then put in the steering wheel assembly. You need to attach the steering pad afterward while hooking up the cable to the negative battery terminal with a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf). Check the SRS warning light for correct operation in the last step.

Related 2009 Scion xB Parts

Alternate Year Models

2008 Scion xB Wiper Switch 2010 Scion xB Wiper Switch