OEM 2010 Scion xB Fan Motor

2010 Scion xB Fan Motor Parts Q&A

• Q: How to install the cooling fan motor on 2010 Scion xB?

  A: The first step to install the cooling fan motor for the 2AZ-FE requires securing the fan with three bolts followed by connecting the wire harness clamp. You should install the No. 2 fan through the same installation procedure. Fasten the cooling fan motor by using a nut before securing the No. 2 cooling fan motor with its corresponding nut. Create these installations by putting in the fan shroud then the outlet radiator hose while completing the inlet radiator hose and lower radiator support. Start placing the radiator assembly along with the condenser before you adjust the air conditioning tube and accessory assembly. When ready the technician will combine the sub-assembly with a discharge hose and the Number One water by-pass hose. The next step involves installing the No. 2 fan shroud together with the radiator support cushion before connecting both outlet and inlet radiator hoses. The technician must attach the hood lock support sub-assembly and the hood lock control cable assembly before installing the bracket for the No. 1 water hose clamp. The service technician should install the front bumper cover and radiator grille while adding the No. 1 radiator grille garnish. To complete the battery installation viewers first need to add engine coolant then perform a refrigerant charge followed by engine warm-up and lastly conduct checks for coolant and refrigerant leaks. The last step includes hood installation followed by examination and potential adjustments of the hood as required.