×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2010 Scion xB Antenna Cable
Radio Antenna Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Antenna Cables found
2010 Scion xB Antenna Cable, Rear
Part Number: 86101-12700$103.56 MSRP: $145.36You Save: $41.80 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Rear
- Position: Rear
- Part Name Code: 86101J
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.5 x 7.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 86101-12700
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2010 Scion xB Antenna Cable, Front
Part Number: 86101-12740$79.55 MSRP: $111.65You Save: $32.10 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cord Sub-Assembly, Antenna; Antenna Cable, Front
- Position: Front
- Part Name Code: 86101
- Item Weight: 1.10 Pounds
- Item Dimensions: 15.9 x 6.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 86101-12740
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2010 Scion xB Antenna Cable
Looking for affordable OEM 2010 Scion xB Antenna Cable? Explore our comprehensive catalogue of genuine 2010 Scion xB Antenna Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2010 Scion xB Antenna Cable Parts Q&A
- Q: How to install the antenna cable while ensuring safety precautions for the SRS Air Bag system on 2010 Scion xB?A: Service personnel must begin by studying warning notices about the SRS Air Bags since antenna cable installation affects this system. The installation process begins by installing the No. 2 antenna cord sub-assembly. Position the marking tapes of the antenna cord with the roof headlining markings and fix the antenna cord to the headlining through three new tape pieces. Use 6 new pieces of tape to arrange the antenna cord within the roof headlining cutout according to the markings before installing the remaining antenna cord section with an additional piece of tape. Installation of the antenna cord sub-assembly involves clamping it securely with 4 clips while connecting both connectors followed by torquing the bolt at 8.4 Nm. The installation sequence continues with fixture of the roof headlining. The connection sequence ends by fitting the cable to the negative terminal and tightening it to 5.4 Nm (55 kgf-cm, 48 in-lbf). Then check the SRS warning light.