How to remove and replace the blower motor on 2010 Scion tC?

The procedure for removing and replacing the blower motor begins with disconnecting the negative battery cable terminal along with at least ninety seconds of wait time to avoid activating Air Bags and seat belt pretensioners. The service process starts with removing both parts of the instrument panel sub-assembly followed by removing the lower section. Remove the ECM then proceed by taking out the air duct. There are three connectors from the blower assembly to disconnect followed by the removal of screws and bolt and detachment of the claw that leads to the final removal of the blower in order.

OEM 2010 Scion tC Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2010 Scion tC Blower Motor
Part Number: 87103-21010
$181.61 MSRP: $259.30
You Save: $77.69 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Sub-Assembly, Blower; HVAC Blower Motor Assembly; Fan & Motor; Motor Sub-Assembly, Blower W/Fan
- Part Name Code: 87103B
- Item Weight: 3.60 Pounds
- Item Dimensions: 10.0 x 8.8 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 87103-21010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base | 4 Cyl 2.4 L GAS

2010 Scion tC Blower Motor

Looking for affordable OEM 2010 Scion tC Blower Motor? Explore our comprehensive catalogue of genuine 2010 Scion tC Blower Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion tC Parts Questions & Experts Answers

Q: How to remove and replace the blower motor on 2010 Scion tC?
A: The procedure for removing and replacing the blower motor begins with disconnecting the negative battery cable terminal along with at least ninety seconds of wait time to avoid activating Air Bags and seat belt pretensioners. The service process starts with removing both parts of the instrument panel sub-assembly followed by removing the lower section. Remove the ECM then proceed by taking out the air duct. There are three connectors from the blower assembly to disconnect followed by the removal of screws and bolt and detachment of the claw that leads to the final removal of the blower in order.

Related 2010 Scion tC Parts

Alternate Year Models

2009 Scion tC Blower Motor 2011 Scion tC Blower Motor