Other Name: Seal Sub-Assembly, Fender; Fender Splash Shield, Front Right; Seal Sub-Assembly, Fender Apron Mudguard, Passenger Side; Fender Splash Shield
Manufacturer Note: WITHOUT(COLD AREA SPEC)
Position: Passenger Side
Replaces: 53807-0C010
Part Name Code: 53885G
Item Weight: 4.10 Pounds
Item Dimensions: 27.6 x 18.5 x 15.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 53807-0C020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Tundra Submodels:
Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Seal Sub-Assembly, Fender; Fender Splash Shield, Front Left; Seal, Fender Apron Mudguard, Driver Side; Fender Splash Shield
Position: Driver Side
Part Name Code: 53886G
Item Weight: 1.40 Pounds
Item Dimensions: 29.7 x 15.6 x 9.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 53808-0C011
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Tundra Submodels:
Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
2009 Toyota Tundra Wheelhouse
Looking for affordable OEM 2009 Toyota Tundra Wheelhouse? Explore our comprehensive catalogue of genuine 2009 Toyota Tundra Wheelhouse. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Tundra Wheelhouse Parts Q&A
Q: How to remove the front Wheelhouse on the LH side on 2009 Toyota Tundra?
A: The first step to access the LH front fender liner requires detachment of the fender apron mudguard seal. Remove the side step when it is installed on Steel Type Bumpers along with any front fender mudguards. The removal sequence requires you to take off the 18 clips together with the fender apron mudguard. The removal process for a Resin Type Bumper requires removal of the fender apron mudguard seal when combined with the side step component. Start by taking out the front fender mudguard when present before using a screwdriver to remove the pin hold clip and continuing with 17 clips and the fender apron mudguard. The service technician should start by disconnecting the front fender splash shield sub-assembly LH. The fender splash shield requires removal of three clips together with two screws for Steel Type Bumper models. The procedure for a Resin Type Bumper requires using a screwdriver to remove the pin hold clip followed by taking out the 2 clips and 2 screws along with the fender splash shield.