How to install the front Wheelhouse on the LH side on 2008 Toyota Tundra?

You should begin front fender liner installation on the LH side by installing the front fender splash shield assembly. Use 2 screws and 1 clip along with 2 new labeled A clips to install the steel type bumper front while achieving a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf). When installing the fender splash shield the resin type bumper requires two screws and two clips which should receive a 5.4 Nm (55 kgf-cm, 48 in-lbf) torque while the pin hold clip groove should maintain a vertical position. The installation of fender apron mudguard seal comes next in the procedure. The fender apron mudguard of a steel type bumper requires three clips and fifteen new A-labeled clips before performing any complete installation of the front fender mudguard and side step. The fender apron mudguard requires 2 clips and 15 new clips labeled A for installation to a resin type bumper so that the pin hold clip's groove must be vertical while installing the front fender mudguard and side step when applicable.

OEM 2008 Toyota Tundra Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wheelhouses found

View related parts
2008 Toyota Tundra Liner Extension, Driver Side
Part Number: 53806-0C011
$42.20 MSRP: $58.74
You Save: $16.54 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Liner Extension, Front Left; Fender Splash Shield; Shield Sub-Assembly, Front Fender Splash, Driver Side
- Position: Driver Side
- Replaces: 53806-0C010
- Part Name Code: 53806
- Item Weight: 3.40 Pounds
- Item Dimensions: 34.0 x 23.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53806-0C011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Liner Extension, Passenger Side
Part Number: 53805-0C011
$42.20 MSRP: $58.74
You Save: $16.54 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Liner Extension, Front Right; Fender Splash Shield; Shield Sub-Assembly, Front Fender Splash, Passenger Side
- Position: Passenger Side
- Replaces: 53805-0C010
- Part Name Code: 53805
- Item Weight: 1.30 Pounds
- Item Dimensions: 23.1 x 15.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53805-0C011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Fender Liner, Passenger Side
Part Number: 53807-0C020
$154.68 MSRP: $218.96
You Save: $64.28 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Sub-Assembly, Fender; Fender Splash Shield, Front Right; Seal Sub-Assembly, Fender Apron Mudguard, Passenger Side; Fender Splash Shield
- Manufacturer Note: WITHOUT(COLD AREA SPEC)
- Position: Passenger Side
- Replaces: 53807-0C010
- Part Name Code: 53885G
- Item Weight: 4.10 Pounds
- Item Dimensions: 27.6 x 18.5 x 15.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53807-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Liner Extension, Driver Side
Part Number: 53806-0C020
$38.08 MSRP: $53.01
You Save: $14.93 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Liner Extension, Front Left; Fender Splash Shield; Shield Sub-Assembly, Front Fender Splash, Driver Side
- Position: Driver Side
- Part Name Code: 53806
- Item Weight: 2.40 Pounds
- Item Dimensions: 22.2 x 12.1 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53806-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Liner Extension, Passenger Side
Part Number: 53805-0C020
$38.08 MSRP: $53.01
You Save: $14.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Sub-Assembly, Fender Splash; Fender Liner Extension, Front Right; Fender Splash Shield; Shield Sub-Assembly, Front Fender Splash, Passenger Side
- Position: Passenger Side
- Part Name Code: 53805
- Item Weight: 2.30 Pounds
- Item Dimensions: 23.1 x 12.2 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53805-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Fender Liner, Driver Side
Part Number: 53808-0C011
$101.78 MSRP: $142.87
You Save: $41.09 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Sub-Assembly, Fender; Fender Splash Shield, Front Left; Seal, Fender Apron Mudguard, Driver Side; Fender Splash Shield
- Position: Driver Side
- Part Name Code: 53886G
- Item Weight: 1.40 Pounds
- Item Dimensions: 29.7 x 15.6 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53808-0C011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Tundra Wheelhouse

Looking for affordable OEM 2008 Toyota Tundra Wheelhouse? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Wheelhouse. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tundra Parts Questions & Experts Answers

Q: How to install the front Wheelhouse on the LH side on 2008 Toyota Tundra?
A: You should begin front fender liner installation on the LH side by installing the front fender splash shield assembly. Use 2 screws and 1 clip along with 2 new labeled A clips to install the steel type bumper front while achieving a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf). When installing the fender splash shield the resin type bumper requires two screws and two clips which should receive a 5.4 Nm (55 kgf-cm, 48 in-lbf) torque while the pin hold clip groove should maintain a vertical position. The installation of fender apron mudguard seal comes next in the procedure. The fender apron mudguard of a steel type bumper requires three clips and fifteen new A-labeled clips before performing any complete installation of the front fender mudguard and side step. The fender apron mudguard requires 2 clips and 15 new clips labeled A for installation to a resin type bumper so that the pin hold clip's groove must be vertical while installing the front fender mudguard and side step when applicable.