Other Name: Shield Sub-Assembly, Fender Splash; Fender Protection Film, Front Left; Fender Splash Shield; Shield Sub-Assembly, Fender Splash, Rear Driver Side
Position: Rear Driver Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2014-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Liner, Front Fender, Left-Hand; Fender Splash Shield, Front Left; Liner, Front Fender, Driver Side; Fender Splash Shield
Position: Driver Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2014-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Seal Sub-Assembly, Fender; Fender Splash Shield, Front Right; Seal Sub-Assembly, Fender Apron Mudguard, Passenger Side; Fender Splash Shield
Manufacturer Note: WITHOUT(COLD AREA SPEC)
Position: Passenger Side
Replaces: 53807-0C010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2007-2013 Toyota Tundra | Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Liner, Front Fender, Right-Hand; Fender Splash Shield, Front Right; Liner, Front Fender, Passenger Side; Fender Splash Shield
Position: Passenger Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2014-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Liner, Front Fender, Right-Hand; Fender Splash Shield, Front Right; Liner, Front Fender, Passenger Side; Fender Splash Shield
Manufacturer Note: COLD AREA SPEC
Position: Passenger Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2014-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Seal Sub-Assembly, Fender; Fender Splash Shield, Front Left; Liner, Front Fender, Driver Side; Fender Splash Shield
Manufacturer Note: COLD AREA SPEC
Position: Driver Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2014-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
| Page 1 of 2 |Next >
1-20 of 27 Results
Toyota Tundra Wheelhouse
Choose genuine Wheelhouse that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Wheelhouse for your Toyota Tundra? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tundra parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.
Q: How to remove the front Wheelhouse on the LH side on Toyota Tundra?
A:
The first step to access the LH front fender liner requires detachment of the fender apron mudguard seal. Remove the side step when it is installed on Steel Type Bumpers along with any front fender mudguards. The removal sequence requires you to take off the 18 clips together with the fender apron mudguard. The removal process for a Resin Type Bumper requires removal of the fender apron mudguard seal when combined with the side step component. Start by taking out the front fender mudguard when present before using a screwdriver to remove the pin hold clip and continuing with 17 clips and the fender apron mudguard. The service technician should start by disconnecting the front fender splash shield sub-assembly LH. The fender splash shield requires removal of three clips together with two screws for Steel Type Bumper models. The procedure for a Resin Type Bumper requires using a screwdriver to remove the pin hold clip followed by taking out the 2 clips and 2 screws along with the fender splash shield.
Q: How to install the rear Wheelhouse on the LH side on Toyota Tundra?
A:
Starting with the installation of rear wheel house liner (front) on the LH side requires 4 new clips and 2 screws. The installation of rear wheel house liner (rear) requires 7 new clips and 2 screws for completion while the absence of a rear fender mudguard allows for the liner's installation. Begin by installing the rear wheel house liner (rear) with 7 new clips and 1 screw and then complete the installation with the mudguard when a rear fender mudguard exists. You should use 9 new clips and 6 screws to install the rear wheel house liner (center). Continue installing by applying the same procedure to the right-hand side of the vehicle.