OEM 2009 Toyota Tacoma Shift Cable

2009 Toyota Tacoma Parts Questions & Experts Answers

• Q: How to install the Shift Cable assembly for the A340E automatic transmission on 2009 Toyota Tacoma?

  A: The transmission control cable assembly installation for A340E automatic transmission requires securing it with the nut at 14 Nm torque while using 143 kgf-cm or 10 ft-lbf. Secure the transmission control cable bracket and lock plate after which attach the transmission control cable with the nut to the body while maintaining 5.5 Nm (56 kgf-cm, 49 in-lbf) torque. The two nuts securing the transmission control cable to the body require a torque of 5.5 Nm (56 kgf-cm, 49 in-lbf). The cable should then connect with the lock plate before attaching it to the floor shift assembly and installing it onto the floor shift assembly. The installation of the voltage inverter assembly should proceed only after vehicle equipment includes a voltage inverter. Install these components starting with the console box front followed by the instrument panel cup holder tray and conclude with the console box assembly rear and console upper rear panel sub-assembly. Complete the adjustment of the shift lever according to requirements and perform necessary inspections.