Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Center Left; Belt & Retractor; Belt Assembly, Rear Seat 3 Point Type, Outer Driver Side
Manufacturer Note: FAWN,TRIM4#
Position: Outer Driver Side
Replaces: 73370-AE011-E0, 73370-AE010-E0
Part Name Code: 73370
Item Weight: 2.70 Pounds
Item Dimensions: 11.6 x 8.4 x 3.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73370-AE012-E0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Center Right; Belt & Retractor; Belt Assembly, Rear Seat 3 Point Type, Outer Passenger Side
Manufacturer Note: FAWN,TRIM4#
Position: Outer Passenger Side
Replaces: 73360-AE010-E0
Part Name Code: 73360
Item Weight: 3.30 Pounds
Item Dimensions: 11.9 x 11.0 x 8.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73360-AE011-E0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Receptacle, Rear Center Left; Latch; Belt Assembly, Rear Seat, Inner Driver Side
Manufacturer Note: FAWN,TRIM4#
Position: Inner Driver Side
Replaces: 73590-AE010-E0, 73590-AE011-E0
Part Name Code: 73590A
Item Weight: 1.40 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73590-AE012-E0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
| Page 1 of 3 |Next >
1-20 of 46 Results
2009 Toyota Sienna Seat Belt
Looking for affordable OEM 2009 Toyota Sienna Seat Belt? Explore our comprehensive catalogue of genuine 2009 Toyota Sienna Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Sienna Seat Belt Parts Q&A
Q: How should the front Seat Belt assembly be disposed of when installed on 2009 Toyota Sienna?
A: Ornamental disposal of front seat outer belt assemblies requires performing the operation outside vehicle installation areas to prevent disturbances for neighborhood residents. Activate the pretensioner by using the Special Service Tool referenced as 09082-00700 (SRS Air Bag deployment tool) at least 10 m (33 ft) distance away from the front seat outer belt while wearing protective gloves and safety glasses. Use the specified Special Service Tool: 09082-00770 by disconnecting its negative battery terminal cable for 90 seconds to determine proper tool operation. Attach the red wire clip to the battery positive terminal and the black clip to the negative terminal while keeping the yellow connector unconnected. The tool must be discarded if the LED lights up without pressing the activation switch. The tool cuts power from the battery before the pretensioner connector is removed. The floor anchor of the seat belt must be installed then two Special Service Tools need to be connected to the front seat outer belt pretensioner before moving these tools at least 10 m (33 ft) beyond the vehicle. Fully close the vehicle entrances before restoring power to the tool by reattaching it to its battery source. Check that no person is inside the vehicle or within a 10 m (33 ft) border from the vehicle before operating the activation switch to activate the pretensioner. The activated outer belt remains hot so it needs at least 30 minutes of rest before touching it while hand washing is mandatory. When cleaning the pretensioner remove the front seat outer belt and activate it by following the same procedure but protect the belt assembly with a wheel then move the tool to a safe distance before activating it. Handle activated outer belts carefully until you place them in a plastic bag and secure it along with other general waste components.